分子流态下翅片管式热沉传输几率计算分析  

Calculation of Transmission Probability of the Finned Tube Heat Sink in Molecular Flow

作　　者：李春杨[1] 杜春林[1] 孙玉玮[1] 柳晓宁[1] 王晶[1] 许忠旭[1] 向树红[1] 

机构地区：[1]北京卫星环境工程研究所,北京100094

出　　处：《装备环境工程》2016年第5期81-87,共7页Equipment Environmental Engineering

基　　金：国防科工局技术基础"十二五"科研项目(JSJC2013203B002)~~

摘　　要：目的研究空间环境模拟器翅片管式热沉传输特性,为进一步开展真空等效性分析等研究工作奠定基础。方法根据热沉结构特点建立镜面反射气体输运通道模型,采用蒙特卡罗方法,对该模型的传输几率进行分析计算,并建立验证模型,对计算结果进行验证。结果对于所选择的翅片管式热沉,其平面阵列的传输几率为0.030 116 4,柱面阵列的传输几率为0.017 988 6。结论蒙特卡罗方法可以用于计算一定结构的翅片管式热沉的传输几率。通过传输几率的计算,可以将热沉等效为具有相应传输几率的可透射平面,从而在保证模拟精度的同时大大简化模拟计算强度,提高计算效率。Objective To study the transmission probability of the finned tube heat sink and set up the foundation of the future research such as the analysis of the vacuum equivalence of the space environment simulator. Methods Based on the structure of the heat sink, model of the transmission passage with total reflection passage walls was set up. Then the transmission probability was calculated by Monte Carlo method. A verification model was established to verify the calculation results. Results The transmission probability of the plane heat sink panel with the specific structure was 0.030 116 4, while that of the cylindrical one was 0.017 988 6. Conclusion Monte Carlo method can be used to calculate the finned tube heat sink. Through the calculation, the heat sink can be equalized as a penetrable surface which will greatly simplify the calculation of the whole vacuum simulator in further numeric analysis.

关 键 词：空间环境模拟器 热沉 分子流 传输几率 

分 类 号：TJ04[兵器科学与技术—兵器发射理论与技术] TG172.4[金属学及工艺—金属表面处理]