化学成分对DL05电缆钢导电率的影响  

Effect of Chemical Composition on Electric Conductivity Ratio of Steel DL05 for Cable

作　　者：黄红兵[1] 彭其春[1] 徐静波[2] 习天辉[2] 李伟[2] 朱国栋[1] 

机构地区：[1]武汉科技大学钢铁冶金及资源利用省部共建教育部重点实验室,武汉430081 [2]武汉钢铁(集团)公司,武汉430083

出　　处：《特殊钢》2016年第6期60-63,共4页Special Steel

摘　　要：DL05钢的冶金流程为铁水-PB脱硫处理-BOF-吹氩-RH-200 mm×200 mm方坯连铸-轧制成Φ6.5 mm线材。分析了生产的256炉次的DL05钢化学成分对导电率的影响,得出钢中元素总含量或钢中Mn含量增加,钢的导电率降低,但当钢中元素总含量(不含Mn)增加,钢的导电率增加不显著,因此Mn含量对钢导电率的影响最大。提高钢的洁净度,亦有利于改善钢的导电率。通过将原先DL05钢的化学成分控制范围(/%:≤0.10C,≤0.10Si,≤0.35Mn,≤0.030P,≤0.030S)优化为(/%)≤0.02C,≤0.03Si,≤0.12Mn,≤0.025P,≤0.015S,和RH精炼过程有效控制钢的洁净度后,256炉次检验结果表明,该钢导电率≥16%的炉次比率从原63.25%提高到93.75%。The metallurgical flowsheet for steel DL05 is hot metal- PB desulphurization treatment- BOF- argon blo- wing- RH- 200 mmx 200 mm blooms casting-rolled to Φ6. 5 mm rod products. The effect of produced 256 heats steel DL05 chemical composition on electric conductivity ratio is analyzed, it is obtained that with increasing total content of elements in steel or increasing Mn content in steel the electric conductivity ratio decreases, but with increasing the total content ele- ments （except Mn） the electric conductivity ratio of steel increases not obviously, therefore the effect of Mn content in steel on electric conductivity ratio is greatest. And improving the cleanliness of steel is available to improve the electric conduc- tivity ratio of steel. With optimizing the chemical composition original control range of steel DL05- /% ： ≤0. 10C, ≤ 0.10Si, ≤0. 35Mn, ≤0. 030P and ≤0. 030S to the control range-/% ：≤0. 02C,≤0. 03Si, ≤0. 12Mn,≤0. 025P and≤0. 015S, and effectively controlling the cleanliness of steel during RH refining, the 256 heats examination results show that the percentage of heats of electric conductivity ratio ≥16% increases from original 63.25% to 93.75%.

关 键 词：DL05电缆钢 BOF-RH 导电率 MN 化学成分 

分 类 号：TF76[冶金工程—钢铁冶金] TG142.1[一般工业技术—材料科学与工程]