过氧化氢蒽醌加氢流化床Pd／Al2O3催化剂载体性质与催化性能的关系  

Effects of carrier properties on the catalytic performance of Pd/Al_2O_3 catalyst for anthraquinone hydrogenation to hydrogen peroxide in the fluid-bed

作　　者：张孟旭 戴云生 安霓虹 唐春 沈亚峰 周伟 李明杰 

机构地区：[1]贵研工业催化剂(云南)有限公司,云南昆明650106 [2]贵研铂业股份有限公司,稀贵金属综合利用新技术国家重点实验室,云南昆明650106

出　　处：《工业催化》2016年第10期47-51,共5页Industrial Catalysis

摘　　要：以氯化钯为前驱体,活性氧化铝为载体,采用等体积浸渍法制备蒽醌加氢流化床Pd/Al_2O_3催化剂。考察载体比表面积、孔容、孔径、粒度分布及表面形貌与催化剂催化性能的关系,结果表明,载体比表面积较高,小孔径且孔径分布不均匀,粒度较大且粒度分布均匀,载体表面光滑且成球性好的载体对应的催化剂性能较好。采用优化后活性氧化铝载体制备的Pd/Al_2O_3催化剂的氢化效率和选择性分别为9.98 g·L-1和80.3%。Using PdCl2 as the precursor and Al2O3 as the carrier, Pd/Al2O3 catalyst for anthraquinone hydrogenation in the fluid-bed process was prepared by incipient wetness impregnation. The effects of BET specific surface area, pore volume, BJH average pore diameter,particle size distribution and the morphology of the carriers on the catalytic performance of palladium catalysts were investigated. The results showed that the catalyst exhibited the better catalytic performance which was prepared by using the carrier with higher BET specific surface area, small BJH average pore diameter and non-uniform distribution of pore diameter,iarger and well-distributed particle size, good sphericity and smooth surface. Using Pd/Al2O3 catalyst prepared with optimized carrier,the hydrogenation efficiency and the selectivity were 9.98 g · L^-1 and 80.3% ,respectively.

关 键 词：催化剂工程 过氧化氢 蒽醌 流化床 氢化 钯催化剂 

分 类 号：TQ426.65[化学工程] TQ123.6