熔融沉积制造工艺参数的优化  

Research on process parameter optimization of fused deposition modeling

作　　者：邹国林[1] 郭东明[1] 贾振元[1] 刘顺福[1] 

机构地区：[1]大连理工大学机械工程学院,辽宁大连116024

出　　处：《大连理工大学学报》2002年第4期446-450,共5页Journal of Dalian University of Technology

基　　金：国家自然科学基金资助项目 (重点项目 5 9935 110 )

摘　　要：在 FDM工艺参数优化设计中 ,使用一个包含 2 2个尺寸、几何精度及表面粗糙度特征的测试件 ,采用一个具有最少试验次数的正交试验得到 2 7个 FDM原型 .通过使用三坐标测量仪和表面粗糙度轮廓仪来测量原型件的各种特征 ,并使用 MATLAB软件进行试验数据处理 ,据此结果来评估 FDM原型件的质量 .取得了加工工艺参数与原型件质量之间的关系 ,并进行了工艺参数的优化 .研究结果表明 ,工艺参数的优化设置能大幅度改善原型件的质量 .This paper uses a standard benchmark part, which contains 22 dimensional, geometrical and surface roughness features, to conduct process parameter optimization of FDM. An orthogonal test which has the characteristic of the least experimental runs has been employed by means of orthogonal test design techniques, detailed measurements for 27 prototypes are then taken using a 3-D coordinate measurement machine and surface coarseness profiling instruments. These measurement data are dealt with by using MATLAB software and the results can be used to evaluate the quality of FDM prototypes. So the functional relationships between the input process parameters and output prototype quality are found, and the process parameter optimization is carried out. The results indicate that the optimal setup of process parameters can evidently improve the quality of FDM prototypes.

关 键 词：熔融沉积制造 工艺参数 正交试验 快速成型系统 FDM 基准件 参数优化 集成制造 

分 类 号：TH166[机械工程—机械制造及自动化] TH162