检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
机构地区:[1]中国矿业大学深部岩土力学与地下工程国家重点实验室,江苏徐州221008 [2]中国矿业大学力学与建筑工程学院,江苏徐州221116
出 处:《煤炭技术》2016年第11期198-200,共3页Coal Technology
摘 要:运用理论计算、数值模拟并结合现场试验研究了凉水井煤矿2近距煤层上组煤开采后底板破坏深度及下组煤顶板导裂带高度。结果表明,上组煤底板在采动后应力集中影响下产生破裂,随后受周期来压的影响稍有加深至16 m。当开采下组煤时,导裂带裂隙叠加并贯通至上组煤老空区,同时上组煤导裂带会更加发育,松散含水层水及地表水将更易导入采煤工作面,应提前预防。Use the theoretical calculation, numerical simulation and field test to study the Liangshuijing mine crack depth of the upper coal seam's floor and the crack height of the lower coal seam's roof rock strata. The results show: when mining the upper coal seam the floor crack formed, then with the roof rock periodic weighting, the crack will slightly deepen to 16 m. When exploiting the lower coal seam, the crack of the lower coal seam's roof rock strata will stack up with the floor crack of the upper coal seam, making the crack reach to the goaf, meanwhile, the crack of the upper coal group will be more developed, the loose aquifer and surface water will be more easy to blast in working face, should be early prevented.
分 类 号:TD745[矿业工程—矿井通风与安全]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.124