机场主机房智能布线施工技术  

Computer Room Intelligent Wiring of Construction Technology at Airport

作　　者：衡国志 Heng Guo-zhi

机构地区：[1]北京中航空港建设工程有限公司,北京101300

出　　处：《建筑技术开发》2016年第9期1-2,共2页Building Technology Development

摘　　要：虽然目前智能布线系统在民航机场内应用很少,但随着机场规模不断扩大,机场机房的设备数量、系统复杂程度逐步增加,对综合布线系统的要求也越来越高。智能布线在机场机房竣工后的跳线维护方面有着普通综合布线无法比拟的优势。同时,智能布线系统对前期设计和后期施工方面的要求也比普通综合布线要高很多,智能布线系统要比普通布线系统贵30%,而在现有的普通布线系统上安装智能布线管理系统,只需改变原有布线的20%。有资料显示,尽管首次安装成本相对更高,但是维护成本却大大减少。因此,智能布线在民航行业的应用前景十分广泛。Although smart wiring system in the civil aviation airport is rarely used,but with the continuous expansion of the size of the airport,airport room equipment quantity,degree of complexity of the system gradually increased,the requirements of the comprehensive wiring system is also getting higher and higher.Intelligent wiring with common cabling incomparable advantage in the airport after the completion of the maintenance room jumper.At the same time,smart wiring system of pre design and post construction requirements also than ordinary cabling to much higher,smart wiring system to expensive 30%than the generic cabling system,and in the existing generic cabling system,installation of smart wiring management system,just 20%of the original cloth line change.Data show that,despite the relatively high cost of the first installation,but the maintenance costs are greatly reduced.Therefore,the application of intelligent cabling in the civil aviation industry is still very broad prospects.

关 键 词：机场机房 电子配线架 智能布线施工 

分 类 号：TU85[建筑科学]