陶瓷颗粒含量对Cr-Al_2O_3活塞环抗黏着性能的影响  

Effect of Ceramic Particle Content on Anti-adhesion Performance of Cr-Al_2O_3 Composite Coating Piston Ring

作　　者：马乐[1] 金梅[1] 吴迪[2] 李斌[1] 沈岩[1] 姜鹏程 徐久军[1] 

机构地区：[1]大连海事大学船机修造工程交通行业重点实验室,辽宁大连116026 [2]南京航空航天大学材料科学与技术学院,江苏南京210016 [3]戚墅堰机车车辆工艺研究所有限公司,江苏常州213011

出　　处：《车用发动机》2016年第5期69-72,共4页Vehicle Engine

基　　金：辽宁省教育厅基金资助项目(L2015065);中央高校基本科研业务费专项资金资助项目(3132015032)

摘　　要：通过贫油试验的方法对陶瓷颗粒含量分别为0，1．01％，1．68％，2．82％，3．45％，4．38％的 Cr‐Al2 O3活塞环的抗黏着性能进行评价，并探讨了 Cr‐Al2 O3活塞环镀层中陶瓷颗粒含量对活塞环抗黏着性能的作用机制。试验结果表明：含有陶瓷颗粒的 Cr‐Al2 O3环的抗黏着性能优于不含陶瓷颗粒的 Cr‐Al2 O3环，且其抗黏着性能与陶瓷颗粒含量相关。当陶瓷颗粒含量为2．82％时，抗黏着性能最好，陶瓷颗粒含量在0～2．82％时，Cr‐Al2 O3环抗黏着性能随陶瓷颗粒含量的增多而提高，陶瓷颗粒含量大于2．82％时，Cr‐Al2 O3环抗黏着性能随陶瓷颗粒含量的增多而降低。The anti‐adhesion performance of Cr‐Al2 O3 composite coating piston ring respectively with 0% ,1 .01% ,1 .68% , 2 .82% ,3 .45% and 4 .38% content of ceramic particle was evaluated by the method of lean oil test and the improvement mecha‐nism of ceramic particle was discussed .The results show that the anti‐adhesion performance of Cr‐Al2 O3 composite coating pis‐ton ring is better than that of original chrome plated piston ring and the performance is related to the content of ceramic parti‐cle .The anti‐adhesion performance of Cr‐Al2 O3 piston ring is the best when the content of ceramic particle is 2 .82% ,improves within the critical content and becomes worse beyond the content with the increase of ceramic particle .

关 键 词：活塞环 铬基陶瓷 复合镀层 黏着磨损 陶瓷颗粒 

分 类 号：TK417.12[动力工程及工程热物理—动力机械及工程]