0.3TKu波段返波管的低磁场特性研究  

Study of a Ku-Band Backward Wave Oscillator Characteristics with Low Magnetic Field of 0.3T

作　　者：邵剑波[1,2] 谢鸿全[1] 李正红[2] 马乔生[2] 

机构地区：[1]西南科技大学理学院,四川绵阳621010 [2]中国工程物理研究院应用电子学研究所,高功率微波技术重点实验室,四川绵阳621900

出　　处：《电子学报》2016年第9期2057-2061,共5页Acta Electronica Sinica

基　　金：国家自然科学基金(No.61271109)

摘　　要：为了实现相对论返波管振荡器(RBWO)永磁包装,本文采用Magic模拟软件在0.5T低磁场相对论返波管(RBWO)器件结构基础上,通过在器件慢波结构末端添加一个部分反射腔,减小电子束质量对束波转换影响,即减小引导磁场的影响,实现了Ku波段相对论返波管振荡器0.3T磁场下运行.当电子束束压600k V、电子束束流7k A时,模拟得到器件输出微波功率740MW,效率18%.尽管该器件的效率低于0.5T磁场下的效率(25%),然而0.3T引导磁场在工程上更容易实现.结合小型化的脉冲功率源进行实验研究,当二极管束压580k V、束流6.5k A,实验获得功率600MW,频率13.10GHz,脉宽25ns的微波输出,该器件的研制可以促进高功率微波(HPM)系统小型化的发展.In order to realize the relativistic backward wave oscillator（ RBWO） permanent magnet packaging,simulation software Magic is used and based on the structure of the relativistic backward wave oscillator（ RBWO） with lowmagnetic field of 0. 5T,through adding a partially reflecting cavity at the end of the device＇s slowwave structure to reduce the effect of the quality of electron beam on the beam-wave conversion,that is,to reduce the effect of guiding magnetic field,so this paper realized the Ku band relativistic backward wave oscillator normal operation at 0. 3T. When the electron beam is600 k V and the beam current is 7k A,the output microwave power of 740 MW and the efficiency of 18% are obtained in the simulation software Magic. Although the efficiency of the RBWO at 0. 3T is lower than that at 0. 5T（ 25%）,guiding magnetic field of 0. 3T is easier to realize in engineering. Experiment on the miniaturization of pulse power source,when the diode is 580 k V and the beam is 6. 5k A,achieves output power of 600 MW and the frequency of 13. 10 GHz with the corresponding pulse width of 25 ns.

关 键 词：相对论返波管 小型化 KU波段 

分 类 号：TN125[电子电信—物理电子学]