IR-UWB系统中基于能量检测的TOA估计  

TOA Estimation Based on Energy Detection for IR-UWB System

作　　者：罗珊珊[1,2] 李强[2,3] 丁广太[1] 王营冠[2] 何为 

机构地区：[1]上海大学计算机工程与科学学院,上海200444 [2]中国科学院上海微系统与信息技术研究所,上海201899 [3]上海物联网有限公司,上海201899

出　　处：《计算机技术与发展》2016年第11期134-138,共5页Computer Technology and Development

基　　金：上海市浦江人才计划项目资助(14PJ1433100)

摘　　要：针对传统能量检测算法中到达时间(TOA)估计精度不高的问题,提出了一种基于MMMR进行归一化门限设置的TC算法。首先,产生符合FCC频率限制的脉冲超宽带(IR-UWB)信号;其次,建立IEEE802.15.4a(CM1,CM2)信道模型,得到接收信号;最后,对所接收信号进行能量分析,得到TOA估计。利用所接收能量块中最大最小值的算术平均值和整个能量采样序列的均值设置MMMR-TC算法的阈值,既包括了噪声,也包括了有用信号。仿真结果表明:MMMR-TC的MAE总体性能均优于经典的MES、MES_SB和TC;通过仿真实验确定了能量阈值;特别是在低SNR时,CM1信道下MAE约低于经典TOA估计算法的10%,CM2信道下约为20%;所提算法几乎在所有信噪比范围内都能有效提高TOA估计精度。Focused on the issiae of the low accuracy of TOA estimation based on energy detection method, a TC （Threshold Comparison） algorithm is proposed whose normalized threshold is set based on the MMMR （Maximum and Minimum to Mean energy sample Ratio） criteria of the energy samples. Firstly, the 1R-UWB signal is generated that meets the FCC＇ s limitation. Secondly, CM1 and CM2 are established based on the standard IEEE802.15.4a channel models. Finally ,TOA estimation is gotten by analyzing the energy of received signal. The threshold is computed by the mean energy of the maximum block and the minimum block and the mean energy of all energy block,both with noise and signal. The simulation shows that its overall performance is much better than the classical algorithm like MES （ Maximum Energy Selection） ,MES_SB （ Maximum Energy Selection-Search Back） and TC. The parameters of threshold are obtained by experiments, especially in the low SNR situation, the proposed algorithm achieves the lower MAE （Mean Absolute Error）, which is lower 10% in CM1 and 20% in CM2. The proposed algorithm can effectively improve the TOA estimation accuracy at nearly all SNR ranges.

关 键 词：超带宽 到达时间估计 能量检测 

分 类 号：TN925[电子电信—通信与信息系统]