用于非制冷红外焦平面阵列的高速缓冲器  

A High-Speed Buffer for an Uncooled Infrared Focal Plane Array Readout Circuit

作　　者：杨亚楠[1,2] 胡博[1] 陈力颖[1,2] 

机构地区：[1]天津工业大学电子与信息学院,天津300387 [2]天津市光电检测技术与系统重点实验室,天津300387

出　　处：《微电子学》2016年第5期659-662,共4页Microelectronics

基　　金：天津市应用基础与前沿技术研究计划资助项目(15JCYBJC16300);天津科技特派员项目(16JCTPJC45500)

摘　　要：提出了一种用于非制冷红外焦平面阵列读出电路的高速缓冲器。阐述了该缓冲器的工作原理,并给出具体设计方案。采用Global Foundries 0.35μm混合模式CMOS工艺进行仿真,当负载电容为50pF,负载电阻为100kΩ,且输入信号为1.2~4.8V时,缓冲器的输出带宽大于10 MHz,工作功耗为8.86mW,表明该缓冲器具有大负载、超高速、大摆幅、高精度等特点。A high speed buffer for an uncooled infrared focal plane array（IRFPA）readout integrated circuit（ROIC）was proposed.The operating principle of the buffer was expounded,and the design scheme was given.The proposed circuit was simulated with the Global Foundries 0.35μm mixed mode CMOS process.The simulation results showed that the output bandwidth was greater than 10 MHz and the operating power consumption was 8.86 mW when the load capacitance was 50 pF,the load resistance was 100kΩand the input signal＇s voltage was 1.2-4.8V.The proposed buffer featured large load,super high speed,large swing,high precision and so on.

关 键 词：红外探测器 读出电路 高速缓冲器 

分 类 号：TN364[电子电信—物理电子学]