离心压缩机进口导叶叶型的进一步研究  

Further study on profiles of inlet guide vane in centrifugal compressor

作　　者：冀春俊[1] 孙琦[1] 范朝阳 孙淼[1] 冀文慧 

机构地区：[1]大连理工大学能源与动力学院,辽宁大连116024 [2]上海电气电站设备有限公司汽轮机厂,上海200240 [3]大连中意透平科技有限公司,辽宁大连116023

出　　处：《热科学与技术》2016年第5期386-390,共5页Journal of Thermal Science and Technology

摘　　要：为提高离心压缩机进口导叶的质量流量调节能力,以原研究成果为基础对导叶叶型做进一步研究。通过数值模拟计算,对不同厚度弯叶型和不同弯度位置导叶的质量流量调节能力进行对比分析。结果表明,虽然减小弯叶型的厚度可扩大其质量流量调节范围,却增加了流动损失,使压缩机效率下降;将弯叶型最大挠度位置向后移,可有效提高导叶的质量流量调节能力,且其产生的损失对压缩机性能影响不大。最终选择出适合于导叶进行质量流量调节的最佳叶型,减少了压缩气体的排空浪费。In order to improve the flow regulation ability of the inlet guide vane in centrifugal compressor,a further study is made based on the previous research results of our research group.Through numerical simulation and calculation of different thickness of curved vanes and different camber position of guide vanes,flow regulation ability was compared and analyzed.The results show that although reducing the thickness of the curved vane can enlarge its flow regulation range,the flow loss can be increased,and the efficiency of the compressor can be reduced.Finally,the best vane profile was selected,which is suitable for the flow regulation of guide vanes,to reduce the waste of compressed gas.

关 键 词：离心压缩机 进口导叶 叶型 质量流量调节 

分 类 号：TH452[机械工程—机械制造及自动化]