铝合金双台阶筒形件二次充液成形数值模拟  

Numerical Simulation of Aluminum Alloy Double-stage Cylindrical Cup by Two-step Hydro-dynamical Deep Drawing

作　　者：刘晓晶[1] 冯章超 刘巍岩[1] 李官[1] 王雅为 Liu Xiaojing Feng Zhangchao Liu Weiyan Li Guan Wang Yawei(School of Materials Science and Engineering, Harbin University of Science and Technolog)

机构地区：[1]哈尔滨理工大学材料科学与工程学院

出　　处：《特种铸造及有色合金》2016年第10期1031-1034,共4页Special Casting & Nonferrous Alloys

基　　金：黑龙江省自然科学基金资助项目(E201102)

摘　　要：针对双台阶筒形件在一次充液拉深成形过程中悬空区减薄、起皱及破裂等问题,设计了二次充液拉深技术。采用Dynaform软件建立了有限元分析模型,分析了液室压力、模具参数对成形质量的影响,提出了优化的工艺参数。结果表明,提出的工艺方法可实现双台阶筒形件的精确成形,采用优化后的工艺参数可获得壁厚分布均匀,最小壁厚可达0.851mm的零件。In order to reduce the thinning,wrinkle and fracture of the double stepped cylindrical cup in the vacant areas which was shaped by one-step hydro-mechanical deep drawing,two-step hydro-mechanical deep drawing was introduced.The finite element model of hydromechanical deep drawing was established by the Dynaform software.The effects of process parameters such as forming pressure and mould parameters were analyzed by the finite element method in detail,and the optimized process parameters were presented.The results indicate that the proposed technological method is feasible for the integral forming of the double stepped cylindrical cup.Moreover,parts with uniform thickness distribution and high quality can be formed successfully by using the optimized parameters,and the final minimum wall thickness can be reached up to 0.851 mm.

关 键 词：铝合金 双台阶筒形件 数值模拟 板材成形 二次拉深 

分 类 号：TG306[金属学及工艺—金属压力加工]