典型高线全厂的能耗计算模型及节能潜力分析  

Energy consumption calculation and potential energy saving measures analysis of typical high-speed wire-rod rolling line

作　　者：叶奔[1,2] 柯衡珍[1] YE Ben KE Heng-zhen(Hot Rolling Company,WlSDRI Engineering ＆ Research Incorporation Limited,Wuhan 430223 ,China State Key Laboratory of Refractories and Metallurgy,Wuhan University of Science and Technology,Wuhan 430081, China)

机构地区：[1]中冶南方工程技术有限公司热轧分公司,湖北武汉430223 [2]武汉科技大学耐火材料与冶金国家重点实验室,湖北武汉430081

出　　处：《轧钢》2016年第5期45-48,共4页Steel Rolling

基　　金：国家863计划资助项目(2014AA041803)

摘　　要：对典型配置的高线全厂能耗进行了计算,主电机电耗计算基于考虑电机效率的算法,其他设备也尽量采用此方法。对能耗计算结果进行了分析,加热炉和主电机是最主要的耗能设备。针对能耗分布情况,分析了全厂的节能措施。对计算得到的车间电耗和部分厂家数据进行了对比,发现计算结果误差较小,与现场数据一致性好。The energy consumption calculation of typical high-speed wire-rod rolling was carried out.The electricity consumption calculation of main motors was carried out while considering the motor efficiency.Electricity consumption calculation of other equipments were also made by using this method.An analysis was obtained from the result of the calculations.Heating furnace and main motors were the main energy consumption equipments.Potential energy saving measures were put forward aiming at energy consumption distribution.A comparison between calculation and practical data from some manufactures was made and the calculation result was in good consistence with practical data.

关 键 词：线材 能耗 节能 电机效率 

分 类 号：TG338[金属学及工艺—金属压力加工]