炭基复合材料与人骨的力学性能对比分析  

Comparative analysis of mechanical properties between carbon matrix composites and human bone

作　　者：刘京[1] 肖鹏[1] 于澍[1] 李晓[1] 吴强[1] 刘立宏[2] 郭晓柠[2] 肖涛[2] LIU Jing XIAO Peng YU Shu LI Xiao WU Qiang LIU Lihong GUO Xiaoning XIAO Tao(Powder Metallurgy Research Institute, Central South University, Changsha 410083, China The Second Xiangya Hospital, Central South University, Changsha 410083, China)

机构地区：[1]中南大学粉末冶金研究院,长沙410083 [2]中南大学湘雅二医院,长沙410083

出　　处：《复合材料学报》2016年第11期2657-2665,共9页Acta Materiae Compositae Sinica

基　　金：国家"863"计划(2015AA033503)

摘　　要：选用3种炭基复合材料,分别为采用化学气相沉积(CVD)工艺和CVD/浸渍复合工艺制备的2种C/C复合材料以及采用CVD/熔融渗硅(MSI)工艺制备的C/C-SiC复合材料,通过对比分析3种炭基复合材料与人骨的微观结构和力学性能,研究了所选用的3种炭基复合材料作为新型骨折内固定材料的可行性。结果表明:3种炭基复合材料与人骨均具有纤维增强、多孔基体的微观结构形态。在力学性能方面,3种炭基复合材料的弹性模量与人骨都较为接近,其中C/C-SiC复合材料的力学性能与人骨最为接近,分别为弯曲强度213.0 MPa、剪切强度19.3 MPa、压缩强度228.1 MPa,有望成为理想的接骨板材料。CVD和CVD/浸渍工艺制备的C/C复合材料,弯曲强度分别仅为161.8MPa和174.6MPa,低于人骨的弯曲强度,后期可通过改进坯体结构和制备工艺等方法来使其力学性能与人骨相匹配。Three kinds of carbon matrix composites（chemical vapor deposition（CVD）prepared C/C composites,CVD/impregnation prepared C/C composites and CVD/molten silicon infiltration（MSI）prepared C/C-SiC composites,respectively）were chosen to study their potential application as new internal fixation materials.The microstructure and mechanical properties of three kinds of carbon matrix composites and human bone were analyzed.The results show that three kinds of carbon matrix composites and human bone have fiber reinforced porous matrix microstructure.As for mechanical property,the elastic modulus of three kinds of carbon matrix composites and human bone are highly similar.C/C-SiC composites is expected to be used as an ideal bone plate material since it has the closest mechanical property compared to human bone,for bending strength of 213.0 MPa,shear strength of19.3 MPa and compressive strength of 228.1 MPa.Bending strength of C/C composites prepared by CVD and CVD/impregnation is 161.8MPa and 174.6MPa,respectively,which are lower than that of human bone.Mechanical properties of C/C composites can be improved by optimization of the preform structure and preparation process in the future.

关 键 词：人骨 C/C复合材料 C/C-SIC复合材料 弹性模量 力学性能 

分 类 号：TB332[一般工业技术—材料科学与工程]