汽车轮胎气密层中溴化丁基橡胶的加工配方研究  

Study on Processing Formulation Optimization of Bromobutyl Rubber Used in Automobile Tire Inner Liner

作　　者：王春磊[1] 王瑜[1] 焦宏宇[1] 刘秀兰[1] 徐海燕[1] 潘广勤[2] Wang Chun-lei Wang Yu Jiao Hong-yu Liu Xiu-lan Xu Hai-yan Pan Guang-qin

机构地区：[1]中国石油兰州石化公司研究院,甘肃兰州730060 [2]青岛科技大学环境与安全工程学院,山东青岛266042

出　　处：《化工设计通讯》2016年第8期66-67,共2页Chemical Engineering Design Communications

摘　　要：采用合理设计配方中的硫化体系、补强体系、增塑体系和防老体系等,对进口溴化丁基橡胶的硫化加工配方开展优化研究,测试优化硫化加工配方条件下的力学性能,得到较好的溴化丁基橡胶硫化加工配方,并将优化后的配方用于自制溶液法溴化丁基橡胶,得到硫化胶的力学性能达到轮胎气密层的使用要求。The vulcanized processing formulation optimization of imported bromobutyl rubber was studied with the reasonable design of formulations including vulcanization system, filler system, plasticized system, anti-aging system and so on.The optimized vulcanized processing formulations were get, and under the optimized formulation conditions the mechanical property was tested.The optimized formulations were used for synthesized solution bromobutyl rubber, and the mechanical property of vulcanized rubber has achieved application requirement of styre inner liner.

关 键 词：溴化丁基橡胶 溶液法溴化丁基橡胶 轮胎气密层 加工配方优化 

分 类 号：TQ330.1[化学工程—橡胶工业]