基于等标污染负荷法的造纸工业废水处理效果分析与污染源评价——以宜宾纸业为例  

Analysis and Evaluation of Industrial Wastewater Pollution Source Based on the Standard Pollution Load Methed:Taking Yibin's Paper Mill for Example

作　　者：申东[1] 黄国栋[1] 李新[1] 

机构地区：[1]绵阳师范学院资源环境工程学院,四川绵阳621006

出　　处：《绵阳师范学院学报》2016年第11期79-83,共5页Journal of Mianyang Teachers＇ College

基　　金：绵阳师范学院研究生创新实践基金资助项目(XYCXXM201511);四川省教育厅自然科学基金重点项目(13ZA0113)

摘　　要：对宜宾造纸厂的生产概况、废水处理工艺、实际运行参数等进行了调查,并应用等标污染负荷法分析和评价了废水处理效率、污染负荷和主要污染物,为废水处理工艺改进、污染物质控制提供参考.研究结果表明:工业废水处理后p H、SS、BOD_5的浓度均达到国家排放标准限值,CODcr、色度两项超标,去除效率分别为51%、63%,CODcr等标污染负荷比最大44%,即为主要污染物.提出了具体的改进污水处理工艺的措施.The product manufacture and wastewater treatment process of Yibing paper mill are investigated, and with the evaluation of the equal standard pollution load method, this paper analyzes the characteristics of treatment efficiency, pollution load, main pollutants of various pollutants in industrial wastewater. These provide scientific and rational basis for wastewater treatment process and pollutants control of Yibing paper mill. The re- suits indicated that the three index pH, SS,BOD5 reaches the national standard, and CODcr, chroma failed to meet the national standard. The two pollutants treatment efficiency were of 51% and 63%. The equal standard pollution load of CODcr nearly 44%, constituting the major industrial pollutants of Yibing paper mill are CODcr. The countermeasures are introduced in conclusion.

关 键 词：工业废水 等标污染负荷 处理效率 污染物 

分 类 号：X708[环境科学与工程—环境工程]