丙烯酸酯橡胶AR71的结构与性能研究  

Structure and Properties of Acrylate Rubber AR71

作　　者：李诚亮 郑爱隔 史新妍[1] 

机构地区：[1]青岛科技大学橡塑材料与工程教育部重点实验室,山东青岛266042

出　　处：《青岛科技大学学报（自然科学版）》2016年第6期670-674,679,共6页Journal of Qingdao University of Science and Technology:Natural Science Edition

基　　金：国家自然科学基金项目(51273101);山东省高校科技计划项目(J12LA14)

摘　　要：采用红外光谱、热失重与气质联用(TG-GC-MS)、核磁共振及扫描电镜分析方法,对丙烯酸酯橡胶AR71的结构进行了分析,研究了炭黑用量对其性能的影响。结果表明:AR71的主单体为丙烯酸乙酯,硫化点单体为氯乙基乙烯基醚。AR71填充30份炭黑N330,无Payne效应,但50份以后Payne效应明显,随炭黑用量增加,tanδ峰值降低、玻璃化转变温度降低,在高弹态tanδ值升高,适合用作阻尼材料;硫化胶的硬度和定伸应力随炭黑用量增加逐渐增加,但拉伸强度和扯断伸长率均下降。The structure of acrylate rubber AR71 was analyzed by using of Fourier Transform Infrared Spectroscopy（FT-IR）,Thermogravimetry-gas Chromatographymass Spectrometry（TG-GC-MS）and Nuclear Magnetic Resonance（NMR）and Scanning Electronic Microscopy（SEM）.The effects of different amount of carbon black on the performance were investigated.The results showed that ethyl acrylate were the monomer of AR71,and chlorine ethyl vinyl ether was used as vulcanization monomer.With the increasing of carbon black,Payne effect increased significantly,and tanδpeak were decreased.Tgtended to lower temperature and the tanδincreased in rubbery state.The hardness and stress at definite elongation of vulcanized rubber increased with the increasing of carbon black,while tensile strength and the elongation at break decreased.

关 键 词：丙烯酸酯橡胶AR71 炭黑 单体 阻尼 

分 类 号：TQ333.97[化学工程—橡胶工业]