基于CAE开口管件注塑模具冷却系统的研究与分析  

Design and Analysis of Cooling System for Injection Mould of Open-Ended Pipe Fitting Based on CAE

作　　者：汤小东[1] 

机构地区：[1]常州轻工职业技术学院模具系,江苏常州213164

出　　处：《塑料科技》2016年第12期55-58,共4页Plastics Science and Technology

基　　金：2014年常州轻工职业技术学院青年创新基金项目(05070012)

摘　　要：以开口管件为研究对象,运用NX8.5软件和注塑模具技术进行产品的模具设计。重点研究并设计了管件注塑模具的冷却系统,管件内部采用喷泉式冷却系统,外部采用循环式冷却方式。运用Moldflow软件进行了管件的冷却、流动和翘曲分析,获得了优化的成型方案和参数,从而可以提高制品质量,缩短模具设计制造和产品开发周期。Taking the open pipe fittings as the research object, the mold design of the product was studied by using the NX8.5 software and the injection mold technology. The cooling system of injection mold was designed, the inner part of the pipe was used in the fountain type cooling system, and the outer part adopted circulatory cooling system. The Moldflow software was used to analyze the cooling, flow and warping of the pipe fittings, and the optimized forming scheme and parameters were obtained, which could improve the product quality, shorten the development cycle of design and manufacture of the die and product.

关 键 词：MOLDFLOW 冷却系统 喷泉式 循环式 

分 类 号：TQ320.52[化学工程—合成树脂塑料工业]