基于ANSYS Workbench的冷锯机上滑板底座静力分析和模态分析  

Static and Modal Analysis on Upperslide Base of Cold Saw Machine Based on ANSYS Workbench

作　　者：张文烽[1] 傅波[1] 刘德江 卫平 

机构地区：[1]四川大学制造科学与工程学院,成都610065 [2]成都莱克冶金机械设备制造有限公司,成都610041

出　　处：《机械工程师》2016年第12期71-73,共3页Mechanical Engineer

摘　　要：基于CAE技术,以?1800冷锯机上滑板底座为研究对象,利用SolidWorks软件建立了由上滑板、下滑板、凸台、电机、减速器构成的冷锯机的实体模型,导入ANSYS Workbench软件中,根据其在实际工作下的载荷边界条件,在冷锯机上滑板底座上施加均布载荷,进行静力分析,然后对冷锯机进行模态分析,研究上滑板底座的应力分布状态和冷锯机机体振型,为上滑板底座的设计优化提供参考。Based on CAE technology, this paper studies slide base of 01800 cold saw machine. SolidWorks software andANSYS software is used to build solid model of the cold sawing machine, which is composed of upper slide plate, lowerslide,boss, motor and reducer. According to the load boundary conditions in the actual work situation, the uniformlydistributed load is applied on the upper slide base to carry out static analysis. The modal analysis is performed usingANSYS. The stress distribution and mode of slide base are obtained. Analysis results provide a theoretical reference forthe optimal design of the slide base.

关 键 词：冷锯机 上滑板底座 有限元 静力分析 模态分析 

分 类 号：TG561[金属学及工艺—金属切削加工及机床] TP391.7[自动化与计算机技术—计算机应用技术]