检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:曹向禹[1] 李帅[1] 王思琪[2] 王晓红[2]
机构地区:[1]齐齐哈尔大学轻工与纺织学院,黑龙江齐齐哈尔161006 [2]江苏大学化学化工学院,江苏镇江212013
出 处:《水处理技术》2016年第12期72-74,78,共4页Technology of Water Treatment
基 金:黑龙江省自然科学基金项目(E201344);江苏省自然科学基金(BK20131249)
摘 要:以木素磺酸钠、丙烯酸(AA)、丙烯酰胺(AM)为原料,氧化石墨为无机添加剂,过硫酸铵为引发剂,N,N'-亚甲基双丙烯酰胺作为交联剂,采用超声辅助技术合成制备了石墨烯/木质素磺酸钠接枝丙烯酸-丙烯酰胺的有机-无机复合高吸水树脂。同时讨论了反应条件(pH和温度)对树脂吸水性能的影响。并借助红外光谱,扫描电镜对树脂分子结构和表面形态进行了表征。实验结果表明,优化配比下的平衡吸蒸馏水倍率为593 g/g,平衡吸0.9%盐水倍率为62 g/g;在中性条件下和温度为30℃时,该树脂的吸水倍率最优。Super Absorbent Polymer (SAP)is prepared using sodium lignosulfonate (LS), acrylic acid (AA) and acryl arnide(AM) as raw materials, GO as inorganic fill, ammonium peroxydisulfate (NPS) as initiator, N,N'- methylene-bis - aerylamide (NMBA) as cross-linker, ultrasonic synthesis of graphemc /sodium lignosulfonate graft acrylic acid - acryl amidc organic-inorganic composite super absorbent resin. The water absorbing capacity of SAP was discussed under different conditions including temperature, and pH value. Using infrared spectroscopy, scanning electron microscope, the surface morphology and the structure of resin were characterized. The experimental results indicate that its absorbcncies in distilled water and 0.9% NaCl(mass concentration) aqueous solution are 593 g/g and 62 g/g, respectively, under the optimal condition. At neutral pH and the temperature of 30 ℃, water absorbency reaches maximum.
关 键 词:高吸水树脂 木质素磺酸钠 丙烯酸 丙烯酰胺 氧化石墨
分 类 号:TQ321.5[化学工程—合成树脂塑料工业]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.198