套阀型液压凿岩机冲击机构结构设计与实验  

Impact mechanism structure design and experiment of sleeve valve type hydraulic rock drill

作　　者：欧阳斌[1] 杨书仪[1] 伍先明[1] 郭勇[1] 陈建文 Ou Yangbin Yang Shuyi Wu Xianming Guo Yong Chen Jianwen(School of Mechanical and Electrical Engineering, Hunan University of Science and Technology, Xiangtan 411201, China Jianglu Electro Mechanical Company Limitid, Xiangtan 411100, China)

机构地区：[1]湖南科技大学机电工程学院,湖南湘潭411201 [2]江麓机电集团有限公司,湖南湘潭411100

出　　处：《湖南科技大学学报（自然科学版）》2016年第4期24-28,共5页Journal of Hunan University of Science And Technology：Natural Science Edition

基　　金：湖南省自然科学省市联合基金(2015JJ5030);湖南省教育厅科学研究项目(16A074)

摘　　要：以冲击能、冲击频率为设计目标,基于三段分析法设计并计算冲击活塞的结构尺寸、运动参数;依据应力波法,搭建冲击性能测试系统,通过现场测试获得冲击频率,并通过能量计算公式获得冲击能,两者的实测值与设计值基本一致,这为套阀型液压凿岩机的冲击机构结构设计提供了理论指导.The structure sizes and motion parameters of impact piston were designed and computed based on the three-stage analysis. Impact energy and impact frequency were regarded as the design goals. According to the stress wave method, impact performance test system was established, impact frequency was obtained through the field test data. Impact energy was achieved by the energy calculation formula. The measured values and the design values of impact frequency and impact energy were the basically same. The researches provide theoretical guidance for impact mechanism structural design of sleeve valve type hydraulic rock drill.

关 键 词：液压凿岩机 三段分析法 冲击频率 冲击能 应力波法 

分 类 号：TD41[矿业工程—矿山机电]