快速更换凸模镶件的拉杆结构设计  

Design of tie rod structure with rapid changing punch insert

作　　者：刘进军 龚小龙[2] 李健强[2] 冼子祺 张赛军[2] LIU Jin-jun GONG Xiao-long LI Jian-qiang XIAN Zi-qi ZHANG Sai-jun(Lucky Harvest Co., Ltd., Dongguan, Guangdong 523870, China School of Mechanical and Automotive Engineering, South China University of Technology, Guangzhou, Guangdong 510640, China)

机构地区：[1]祥鑫科技股份有限公司,广东东莞523870 [2]华南理工大学机械与汽车工程学院,广东广州510640

出　　处：《模具工业》2016年第12期39-41,共3页Die & Mould Industry

基　　金：2014年东莞市产学研合作项目(2014509109204);2013年省部产学研专项资金技术攻关项目(2013B090600014)

摘　　要：针对实际生产中成形多种局部存在差异的制件,更换模具零件效率低,浪费大量资源的问题,设计拉杆快换凸模结构,实现了带孔和不带孔制件成形时模具零件的快速更换,操作简单快捷,缩短加工2种不同制件中更换模具零件的时间,提高了制件的生产效率。In actual production, the forming part existed local differences. So, the efficient of changing die was low and wasting a lot of resources. A tie rod was designed to rapid change punch structure, which achieved rapid changing to form the part with and without hole. The operation was simple and-quick. It shortened the replacement time for die parts when manufactured two different parts.

关 键 词：模具 凸模 拉杆 快换 

分 类 号：TG385.2[金属学及工艺—金属压力加工]