不锈钢复合板压力容器焊接工艺的研究  

Study on the Welding Technology of Stainless Steel Composite Plate Pressure Vessel

作　　者：付洪亮[1] 付林也 侯斯允 FU Hong-liang FU Lin-ye HOU Si-yun(School of Energy and Power Engineering, Shenyang Institute of Engineering, Shenyang 110136 Shenyang No. 11 Middle SchooI,Shenyang 110034, Liaoning Province China University of Petroleum （Eastern China）,Qingdao 266580,Shandong Province)

机构地区：[1]沈阳工程学院能源与动力学院,辽宁沈阳110136 [2]沈阳市第十一中学,辽宁沈阳110034 [3]中国石油大学(华东),山东青岛266580

出　　处：《沈阳工程学院学报（自然科学版）》2016年第4期378-380,384,共4页Journal of Shenyang Institute of Engineering:Natural Science

摘　　要：对不锈钢复合板压力容器的焊接特点进行了理论分析及实践研究,总结出其焊接工艺,重点研究焊接的三要素:焊接坡口、焊接材料和参数、焊接顺序,并通过焊接件的机理以及物理性能检验分析,说明了不锈钢复合钢板压力容器的焊接工艺的可操作性。The theoretical analysis and practical research on stainless steel clad plate pressure vessel welding characteristics was conducted in this paper,and its welding technologywas summed up too. The study focused on the three elementsin welding,which were welding groove,welding material and parameters,welding sequence. The test analysis of the welding mechanism and physical performance of the weldmentverified the operabilityof the stainless steel composite steel pressure vessel welding technology.

关 键 词：压力容器 不锈钢 复合板 焊接 

分 类 号：TG457[金属学及工艺—焊接]