滑托盘力学性能测试方法及验证  

Test Method and Verification for Mechanical Property of Slip Sheet

作　　者：温时宝[1] 褚晓珂[1] 姜淑芸 杨德龙 

机构地区：[1]青岛科技大学,青岛266042 [2]青岛原彩工贸有限公司,青岛266216

出　　处：《包装工程》2016年第23期23-28,共6页Packaging Engineering

摘　　要：目的简化滑托盘力学性能的测试方法。方法考察滑托盘的使用特点,并参照相关国家标准,提出滑托盘材料应进行拉伸和撕裂力学性能测试,确定试样的制备形状、尺寸以及测试方式和条件,对纸和塑料这2种滑托盘材料进行测试验证。结果拉伸性能的试验中,纵向试样大于横向试样的强度,横向有压痕试样的强度最低;撕裂性能的试验中,横向试样大于纵向试样的强度,纵向有压痕试样的强度最低。结论考察滑托盘材料的力学性能时,只需要分别考察横向有压痕试样的拉伸强度和纵向有压痕试样的撕裂强度,即可快速得到滑托盘材料的最低强度,进而计算得到滑托盘的承载能力。The work aims to simplify the test methods of mechanical property of slip sheet. By investigating the application characteristics of slip sheet and referring to the relevant Chinese national standards, it was proposed that the materials of slip sheet should be tested regarding such mechanical properties as tension and tearing strengths. The shape and size of the sample prepared and the test methods and conditions were determined. On the basis of that, paper and plastic（two kinds of materials of slip sheet） were tested and verified. During the test of tensile property, the strength of longitudinal test sample was greater than that of the transverse test sample, and the strength of the transverse test sample with indentation was the lowest. During the test of tearing property, the strength of transverse test sample was greater than that of the longitudinal test sample, and the strength of the longitudinal test sample with indentation was the lowest. When the mechanical properties of slip sheet＇s material are investigated, only the tension strength of transverse test sample with indentation and the tearing strength of longitudinal test sample with indentation should be considered respectively. By doing so, the minimum strength of slip sheet＇s material can be obtained rapidly, so as to calculate the carrying capacity of slip sheet.

关 键 词：滑托盘 力学性能 拉伸强度 撕裂强度 测试方法 

分 类 号：TB485.3[一般工业技术—包装工程]