关节臂式测量机设计及关节臂参数标定方法研究  

Physical Design of Articulated Arm Coordinate Measuring Machine and Study on Calibration Method for Parameters of Articulated Arm

作　　者：王璇[1] 张旭[1] 陈雷[1] 杨惠欣[2] 张海涛[2] 

机构地区：[1]沈阳黎明航空发动机(集团)有限责任公司,沈阳110043 [2]天津大学精密测试技术及仪器国家重点实验室,天津300072

出　　处：《世界科技研究与发展》2016年第6期1234-1236,共3页World Sci-Tech R&D

基　　金：国家自然科学基金(53175388);中航工业创新基金(2009B41030)资助

摘　　要：为了能够在数控机床加工现场狭长的空间区域内实现整体叶盘的加工原工位测量,设计了一种新型的关节臂式测量机。通过两个直行运动部件和一个旋转关节臂的结合,减少测量机的行程,突破加工现场的空间限制,满足在狭长空间限制下的整体叶盘加工原工位测量需求。并提出一种基于对称转位的关节臂零位和关节臂长度的标定方法。通过实验,验证了所提出方法的有效性和精确性。A novel cantilever coordinate measuring machine（CCMM） was designed in order to realize the in-situ measure- ment of the blisk under the restrictions of the long and narrow space area in the processing site. By the combination of the two straight-going components and the rotary articulated arm, the travel of the CMM was reduced, the space constrain was broken through, and the demand of in-situ measurement of the blisk under the restrictions of the long and narrow space area was met. The calibration methods for both the arm length and arm zero positon of the CCMM based on the symmetrical trans- position were presented. The effectiveness and preciseness of the proposed calibration method had been proved by experi- ments and practice.

关 键 词：测量机 原位测量 关节臂 参数标定 

分 类 号：TG659[金属学及工艺—金属切削加工及机床]