基于脉冲步进调制技术的ECRH全固态阳极高压电源控制系统设计  

Design of Control System for All Solid Anode High-voltage Power Supply Based on Pulse Step Modulation for ECRH

作　　者：饶益花[1] 陈文光[2] 胡波[2] 饶军[3] 冯鲲[3] 康自华[3] 

机构地区：[1]南华大学数理学院,湖南衡阳421001 [2]南华大学电气工程学院,湖南衡阳421001 [3]核工业西南物理研究院,四川成都610041

出　　处：《原子能科学技术》2016年第12期2276-2282,共7页Atomic Energy Science and Technology

基　　金：国家核聚变ITER计划国内配套专项资助(2013GB103000);湖南省科技厅项目资助(2015GK3124)

摘　　要：电子回旋共振管是产生高功率毫米微波的真空电子器件,在可控热核聚变研究、雷达等领域中有重要的应用。针对可控热核聚变研究中1 MW/105GHz回旋管加热系统阳极电源幅度可调且调制的要求,使用高频开关电源技术和脉冲步进调制技术(PSM)研制了全固态阳极高压电源。重点阐述了阳极高压电源实现稳压、调制、前沿时间可调功能的软件控制算法,并通过实验对设计进行了验证。该阳极高压电源具有单脉冲、多脉冲调制和六电平预置波形等3种模式输出功能;输出参数达到35kV/200mA,波形前沿3ms内可调,最大调制频率为1kHz,调节精度在100V以内。设计的控制方法也可应用于其他大功率微波源。The gyrotron is a microwave vacuum electronic device based on electron cyclo‐tron resonance （ECR） ,used to produce high power millimeter microwave in controlled thermonuclear fusion research ,radar and other important application fields .According to the requirements of anode power supply of 1 MW/105 GHz gyrotron for Tokamak electron cyclotron resonance heating （ECRH） ,the high‐frequency switching power sup‐ply technology and pulse step modulation （PSM ） were used to develop the solid anode high voltage power supply .The control algorithm of voltage regulation and modulation function of anode high voltage power supply was expounded ,and the design was verified＆amp;nbsp;by experiments .The output parameter of the anode power supply can reach 35 kV/200 mA with three kinds of output models ,including single pulse ,multi pulse modula‐tion and six preset level of waveform .Its rise time can be adjusted within 3 ms .The maximum modulation frequency is 1 kHz and regulation accuracy within 100 V .The designed control method can also be applied to other high power microwave sources .

关 键 词：回旋管 电子回旋共振加热 脉冲步进调制 高压电源 控制系统 

分 类 号：TM89[电气工程—高电压与绝缘技术]