片状银粉行星球磨过程中的影响因素  

Effecting factors of planetary ball milling the flake silver powders

作　　者：琚伟[1] 伊希斌[1] 张晶[1] 王启春[1] 牟秋红[1] 范会利[1] JU Wei YI Xibin ZHANG Jing WANG Qichun MU Qiuhong FAN Huili(New Material Institute, Key Lab for Adhesion ＆ Sealing Materials of Shandong Province, Shandong Academy of Sciences, Jinan 250014, China)

机构地区：[1]山东省科学院新材料研究所,山东省粘结材料重点实验室,山东济南250014

出　　处：《中国粉体技术》2016年第6期46-49,共4页China Powder Science and Technology

基　　金：山东省中青年科学家科研奖励基金项目,编号:BS2011CL036;山东省自然科学基金,编号:ZR2015YL002

摘　　要：采用机械球磨法制备片状银粉,通过扫描电镜和热重分析仪表征银粉形貌、粒径及纯度,研究球磨动能及后处理等因素对银粉性能的影响。结果表明,以球形银粉为球磨前驱体,氧化锆球为磨球,无水乙醇为球磨介质,球磨转速为200 r/min,球料质量比为12∶1,介料质量比为2∶1,填充系数为0.5,油酸为球磨助剂,随着球磨时间的延长,能够制备出不同粒径范围的高片状率的片状银粉;经过后处理后,银粉表面粗糙,热失质量分数小于0.1%,符合片状银粉的应用指标。The flake silver powders were prepared by planetary ball milling, and then characterized by scanning electron microscopy （SEM） and thermogravimetric analyzer （TGA）. Based on the characterization results, the impacting factors on fabrication and treatment of flake silver were studied. With the conditions that spherical powder as precursor, zirconia balls as balls, ethanol as milling media, milling speed with 200 r/min, the mass ratio of ball and powder with 12：1, the mass ratio of media and powder with 2：1, fill factor with 0.5, and oleic acid as milling aids, the high flaky silver powder with different particle size is prepared with the increase of milling time. After being treated, the surface of silver particle is rough, and TGA is less than 0. 1%. The result shows that the flake silver powder achieves the application standard.

关 键 词：片状银粉 球磨动能 磨球 球磨速度 片状率 

分 类 号：O648.25[理学—物理化学]