临界热流密度流体模化研究进展  

Research progress on fluid-to-fluid modeling method of critical heat flux in flow and boiling heat transfer

作　　者：周先锋[1] 柳建华[1,2] 张良[1] 姜林林[1] 刘旗[1] 

机构地区：[1]上海理工大学能源与动力工程学院,上海200093 [2]上海市动力工程多相流动与传热重点实验室,上海200093

出　　处：《能源工程》2016年第6期12-16,21,共6页Energy Engineering

基　　金：上海市教育委员会重点学科资助项目(J50502);上海市科委建设项目(13DZ2260900)

摘　　要：探讨了模化工质的选择原则,总结比较了目前比较成功的四种预测模型,并从研究较多的流道形式出发,总结了各流道形式的研究现状,发现当下的预测模型适用不同流道形式和相同流道不同工况时,模化效果不理想。最后提出采用流体模化方法研究微通道流动沸腾CHF的必要性。The selection principle of modeling fluid was discussed, and four modeling methods which were successful at present were analyzed and compared. The research status of all sorts of channel types were summarized based on those channel types studied a lot. It was found that the modeling effect was not always suitable when the current prediction models were applied to different channel types or the same channel type in different working conditions. At last, the ne- cessity of applying fluid-to-fluid modeling method to the study of the critical heat flux （CHF） of flow boiling was expounded.

关 键 词：临界热流密度 流体模化方法 模化工质 微通道 研究进展 

分 类 号：TP392[自动化与计算机技术—计算机应用技术]