FC交换机芯片MT端口软核的设计与实现  

Design and implementation of MT port soft-core based on FC switch chip

作　　者：张志禹[1] 许耀斌 曹继英[2] 乔雄[1] 

机构地区：[1]西安理工大学自动化与信息工程学院,陕西西安710048 [2]长安大学信息工程学院,陕西西安710064

出　　处：《微型机与应用》2016年第24期36-39,共4页Microcomputer & Its Applications

摘　　要：随着网络技术的快速发展,FC交换机对网络协议的分析、故障的定位等功能提出新的挑战。首先提出基于FC交换机协议处理芯片的监控端口(Monitor Port,MT)软核的工作原理;然后对监控端口软核进行了设计与实现;最后在虚拟仿真平台和FPGA验证平台下对MT端口的功能和性能分别进行仿真和测试。结果表明,这种新的智能监控模式不仅能够用于网络监管和故障排除,而且可用于流量统计。With the rapid development of network technology, FC switch proposes new challenges for network protocol analysis, fault location function and so on. This paper firstly puts forward working principle based on FC switch protocol processing chip of MT soft-core. Then the MT soft-core is designed and implemented. Finally,under the virtual simulation platform and FPGA verification platform, the function and perform- ance of MT port are simulated and tested respectively. The result shows that this new intelligence monitoring mode not only can be used for net- work monitoring and troubleshooting, but can be used for traffic statistics.

关 键 词：FC交换机 MT端口 虚拟仿真 FPGA验证 

分 类 号：TN47[电子电信—微电子学与固体电子学]