CO_2激光诱导大气放电特性的研究  

Characteristics of air discharges triggered by CO_2 laser

作　　者：邓兴福[1] 王新兵[1] 左都罗[1] 

机构地区：[1]华中科技大学武汉光电国家实验室,武汉430074

出　　处：《激光技术》2017年第1期61-64,共4页Laser Technology

摘　　要：为了研究脉冲CO2激光诱导空气放电的特性,建立了高压电容充放电实验平台,采用间距为8mm、半径为10mm的一对球形石墨电极,取得了放电电压和电流的实时数据,采用2阶振荡电路模型对放电电压和放电电流进行拟合得到了电极间激光诱导放电等离子体的阻抗,并对放电时间、放电延时及抖动做了统计。结果表明,激光诱导放电等离子体的阻抗很小,约1Ω~2Ω,拟合得到的放电等离子体阻抗随放电电压、放电电容、以及激光能量的增加而减小;放电延时随着实验条件的变化在2μs^10μs之间变化,放电延时以及延时抖动随着放电电压和激光能量的增加而降低,而受放电电容大小的影响不明显。由此高稳定性的激光脉冲和高压有助于激光诱导放电过程的稳定。In order to investigate the characteristics of pulsed CO2 laser triggering discharge, a high voltage capacitance discharge experimental platform was set up by a pair of hemisphere graphite electrode with 10mm radius and 8mm gap. The real-time data of discharge voltage and current were obtained. Discharge voltage and discharge current were fitted by two-order oscillation circuit model. The impedance of laser induced discharge plasma was obtained. And the discharge time, discharge delay and jitter data were collected. The results show that the impedance of laser trigger discharge plasma is very little, and of 1Ω-2Ω. The fitted plasma impedance slightly decreases with the increase of laser energy, discharge voltage and capacitance. The delay varies from 2μs to 10μs with the change of experimental condition. Delay and delay jitter decrease with the increase of laser energy and discharge voltage. Discharge capacitance has no obvious effects on delay and delay jitter. Laser pulse and high voltage with high stability are helpful for the stability of laser triggered discharges.

关 键 词：激光光学 CO2激光 脉冲放电 等离子体 空气 

分 类 号：O437[机械工程—光学工程]