检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
机构地区:[1]上海交通大学船舶海洋与建筑工程学院,上海200240
出 处:《地震工程学报》2016年第6期942-947,963,共7页China Earthquake Engineering Journal
基 金:国家自然科学基金(11372180)
摘 要:针对高速公路运营中的路基长期稳定性问题,研发了检测高速公路路基缺陷的全波场映像技术,即一种无损检测技术,主要由单点激发-单点接收的数据采集系统和三维全波场成像系统组成。为评价该技术应用于高速公路路基缺陷检测的准确性,首先使用有限元动力分析方法进行三维数值模拟。在研究三维缺陷模型中全波场传播特性的基础上,对响应波形的频谱特征进行详细分析,在此基础上合成的成像图显示缺陷区域位置与其在模型中的位置及区域大小相吻合。然后在实际预先设置缺陷的等比例高速公路路基模型上开展试验验证,试验结果证明了该技术的准确性,及其在检测高速公路路基缺陷区域及位置上有良好的应用空间。Nowadays in China,with increases in the lengths of new highways and the resultant increasing construction times,many personal injuries have occurred as a result of the structural defects such as track-plate fracture,through-cracks,layer alienation gap,and pulping.Investigating the damages of highway structures is an important and difficult subject,especially for defect diagnosis in a structure's support plate and subgrade surface layer.As various current subgrade defect detection methods are limited and ineffective,how to detect faults quickly and accurately is an important issue in civil engineering.In light of the permanent stability of the subgrade of an operational highway,a full-wave field imaging method was developed to detect defects in a highway subgrade.This detection method was a non-destructive testing method based on the characteristics of high-speed highway structures and the existing level of detects.The detection system was composed of a data acquisition system and an imaging system.The data acquisition system utilized a single-point source and a single receiver,in which three-dimensional full-waveforms were created,received,and recorded.First,to evaluate the feasibility of the method to reveal defects,a 3Dnumerical simulation by a finite-element dynamic method was adopted based on the theory of elastic wave propagation.Using a 3Dnumerical model,the characteristics of a full-wave field within some defects were studied,then the amplitude and frequency spectrum of the multidirectional response waveforms were analyzed.Based on the synthetic image,the defects were revealed and their locations and sizes agreed well with those of the numerical model.Second,a real full-scale highway subgrade model with pre-setting defects was casted,and relative tests were carried out on it.The size and location of defects revealed by the field experiments were similar to that of the actual model.The accuracy of the full-wave field imaging method proved to meet the detection requirements,such as easy maneuverability and r
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.69