线性剪切来流对方柱绕流特性影响的数值分析  

Numerical analysis of influences of linear shear flow on characteristics of flow past a square cylinder

作　　者：王伟[1] 水庆象[1] 王大国[1] 胡彬[1] 

机构地区：[1]西南科技大学环境与资源学院,四川绵阳621010

出　　处：《水利水电科技进展》2017年第1期17-21,共5页Advances in Science and Technology of Water Resources

基　　金：国家自然科学基金(41372301;51349011);西南科技大学研究生创新基金(15ycx037)

摘　　要：为研究线性剪切来流对方柱绕流特性的影响,将对流出口边界条件引入特征线算子分裂有限元法中,建立了线性剪切来流的方柱绕流数值模型,并采用均匀来流的方柱绕流模拟结果验证了该模型计算方柱绕流问题的可靠性。数值模拟结果表明,剪切参数k对方柱绕流尾部形成的两排涡影响明显,涡脱落在k较大时被抑制,在k≥0.4时涡量最终形成一个类似三角形的区域;驻点随k的增加逐渐向高速侧分离点移动,在k≥0.3时驻点的位置不再发生变化;平均阻力系数在0.2≤k≤0.25时发生较大变化,平均升力系数在k≥0.2时为负。In order to investigate the effects of linear shear flow on characteristics of flow past a square cylinder, a numerical model for shear flow past a square cylinder was established by introducing the convective outflow boundary condition into the characteristic-based operator-splitting finite element method. The reliability of the numerical model was verified through simulation of the uniform flow past a square cylinder. The numerical results show that the shear parameter k has a significant effect on the two rows of vortices in the wake of flow past the square cylinder, and a larger k value inhibits the vortex shedding from the cylinder. When k ≥0. 4 ,the formation region of vortices behind the cylinder becomes a triangular zone. As the value of k increases,the stagnation point shifts towards the lateral separation point. When k ≥ 0. 3, the location of the stagnation point remains unchanged. The significant change in the mean drag coefficient occurs in the range 0. 2 ≤k ≤0. 25. When k ≥0. 2 ,the mean lift coefficient is negative.

关 键 词：线性剪切来流 方柱绕流 特征线算子分裂有限元法 剪切参数 流场结构 

分 类 号：O357.5[理学—流体力学]