检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:史杰中 贾昊旸 刘冬生[1] Jie-zhong Shi Hao-yang Jia Dong-sheng Liu(Key Laboratory of Organic Optoelectronics & Molecular Engineering of the Ministry of Education, Department of Chemistry, Tsinghua University, Beijing 100084)
机构地区:[1]有机光电子与分子工程教育部重点实验室清华大学化学系,北京100084
出 处:《高分子学报》2017年第1期135-142,共8页Acta Polymerica Sinica
基 金:国家重点基础研究发展计划(973计划;项目号2013CB932803);国家自然科学基金(基金号91427302;21534007)资助项目
摘 要:设计合成了一条包含两段自互补序列和一段富含胞嘧啶(C)序列的DNA单链.在碱性条件下,两段自互补序列可通过分子间自组装形成一维DNA纳米线,调节p H至酸性条件后,胞嘧啶序列通过形成双分子i-motif结构将纳米线交联,从而形成DNA水凝胶.当加入酸或碱调节体系的p H时,水凝胶的力学强度会发生变化.在p H为5.3时,水凝胶力学强度达到最大,增大或减小p H都会使水凝胶强度降低.同时,改变DNA单链浓度也能够调节水凝胶的力学强度.此凝胶制备过程原料合成简便,无需涉及不同DNA链定量配比的问题,大大简化了实验操作;另外i-motif结构在形成与解离两态之间的转换非常迅速,在几秒钟之内便可完成,也赋予该凝胶快速p H响应的特性.We design a single strand DNA containing two self-complementary sequences and a half i-motif structure. The two self-complementary sequences can self-assemble to form DNA nanowires. Then, the hydrogel can be fo/rmed by crosslinking the half i-motif structures under acid condition. The single strand DNA is diluted to 3 mmol/L in 1 TAE buffer (pH = 7.5) containing 12.5 mmol/L MgClz. The system is heated to 95 ℃ for 5 min and slowly annealed to room temperature. The pH is adjusted to 5.3 to form the DNA hydrogel. The DNA oligomers and assemblies are characterised by PAGE. Then circular dichroism is used to characterize the structure of the duplex and the i-motif. Rheological characterization is used to evaluate the mechanical properties and thermal stability of the hydrogels at different concentration and pH. By changing concentration of the single strand DNA, one can adjust the mechanical strength and thermal stability of the hydrogels. Besides, the mechanical strength can be tuned by changing pH values. When pH value is 5.3, the storage modulus (G') of the hydrogel is 243.9 Pa. When the pH value is increased to 6.0, the G' is lowered to 225.7 Pa because the stability of the i-motif structure decreases as the pH value increases. However, when pH value is changed to 5, the G' is greatly reduced to 57.4 Pa, which is caused by the instability of the duplex structure under acidic condition. In this procedure, the single strand DNA is very easy to be synthesized and the ratio of DNA strands has not to be controlled. Thus, the experimental steps are greatly simplified. Also, the transition of the i-motif between hydrogel formation and its dissociation is reversible and fast (within several seconds), which makes the DNA hydrogel fast pH responsive. Due to these characteristics, this DNA hydrogel holds great potential in bio-sensing, drug delivery and 3D printing.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.42