锑同位素标记压裂支撑剂的制备及作用机制研究  

Preparation and Mechanism of Isotope-Labeled Fracturing Proppant

作　　者：遆永周[1] 李向辉[1] 李灿然[1] 张锋[2] 苑素华 王晓慧[1] 邓刚[1] 华成武[1] 孟闯[1] 

机构地区：[1]河南省科学院同位素研究所有限责任公司,郑州市同位素示踪与探测重点实验室,郑州450015 [2]中国石油大学(华东)地球物理与信息学院,青岛266580

出　　处：《中国陶瓷》2016年第12期17-22,共6页China Ceramics

基　　金：河南省科技创新人才计划项目(144200510026);河南省国际科技合作计划项目(152102410080);国家自然科学基金面上项目(41574119)

摘　　要：以铝矾土为主要原料,以Sb_2O_3为标记物质,在1320℃下合成了同位素标记陶粒压裂支撑剂,研究了标记物质的加入对烧结和支撑剂破碎率的影响。标记元素进入了晶相,并且在压裂支撑剂载体内分布均匀。当加入的Sb_2O_3小于10%时,69 MPa闭合压力下的破碎率低于4.0%,符合行业标准要求,适用于中深油气井压裂裂缝形态及支撑剂位置监测。Bauxite-based isotope-labeled fracturing proppants were prepared at sintering temperatures below 1400℃ via addition of the marking substance of Sb2O3. The effects of Sb2O3 addition on the sintering behavior and the crushing rate of the bauxite-based proppants were investigated. The marking element entered the crystalline phase and evenly distributed throughout the proppant. When the adding amount of Sb2O3 was less than 10%, the broken rate was lower than 4.0% under pressure of 69 MPa, which can meet the national standard and use for detecting the information regarding fracture shape and the location of the proppant in the wells that closure pressure is higher than the shallow wells.

关 键 词：支撑剂 同位素标记 破碎率 压裂裂缝 

分 类 号：TQ174.758[化学工程—陶瓷工业]