行波磁场对ZL205A合金薄壁铸件凝固缺陷和力学性能的影响  

Influence of Traveling Magnetic Field on Solidification Defects and Mechanical Properties of ZL205A Alloy Sheet Casts

作　　者：王亮[1] 范学燚 骆良顺[1] 许纪刚 陈瑞润[1] 伊洪勇 周国柱[2] 王宁 张建兵[2] 苏彦庆[1] 

机构地区：[1]哈尔滨工业大学精密热加工国家级重点实验室,黑龙江哈尔滨150001 [2]首都航天机械公司,北京100076 [3]北京宇航系统工程研究所,北京100076

出　　处：《稀有金属材料与工程》2016年第12期3177-3180,共4页Rare Metal Materials and Engineering

基　　金：国家重点基础研究发展计划("973"计划)项目(2011CB610406);黑龙江省自然科学基金(JC201209);哈尔滨科技局项目(2012DB2BP015)

摘　　要：研究了凝固过程中局部加载行波磁场对ZL205A合金薄壁件缩孔、缩松和力学性能的影响。利用扫描电子显微镜对制备试样的显微组织进行分析,采用电子万能材料试验机对铸件力学性能进行测试。结果表明:与相同条件下获得的未施加行波磁场的铸件进行对比,施加行波磁场的铸件缩孔、缩松缺陷得到大幅改善;经过T6热处理后,抗拉强度、屈服强度、延伸率分别由436.61 MPa、390.22 MPa、3.29%提高到470.24 MPa、416.97 MPa、4.15%,抗拉强度和屈服强度分别提高了33.63 MPa、26.75 MPa,延伸率提高了26.14%。The effect of local loading traveling magnetic field on shrinkage cavity and porosity and mechanical properties of ZL205 A sheet casts was studied. The microstructure and mechanical properties were analyzed by scanning electron microscope and electronic universal material testing machine, respectively. Results show that under travelling magnetic field, the shrinkage cavity and porosity decrease greatly. After T6 heat treatment, the tensile strength, yield strength and elongation increase from 436.61 MPa, 390.22 MPa and 3.29% to 470.24 MPa, 416.97 MPa and 4.15%, respectively; the tensile strength and yield strength increase by 33.63 MPa and 26.75 MPa, respectively, and the elongation increases by 26.14%.

关 键 词：行波磁场 ZL205A合金 薄壁铸件 缩孔和缩松 

分 类 号：TG292[金属学及工艺—铸造]