检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:袁泽波[1] 安志杰[2] 魏静 陈小凯[2] 徐海霞[1] 吕孝明[2]
机构地区:[1]塔里木油田公司油气工程研究院,新疆库尔勒841000 [2]辽河油田公司钻采工艺研究院,辽宁盘锦124010 [3]新疆科力新技术发展股份有限公司,新疆克拉玛依834000
出 处:《当代化工》2016年第12期2763-2765,2768,共4页Contemporary Chemical Industry
基 金:中石油股份公司勘探与生产公司<轮南油田深部调驱提高采收率重大开发试验>;项目号:22131G4010700101
摘 要:针对东河油田油藏地层压力高、温度高和地层水矿化度高的特点,选用耐温耐盐聚合物SD7000研究并优化了适合该油藏的凝胶调驱体系,该体系配方为聚合物0.6%+高温交联剂0.3%+稳定剂0.08%+性能改进剂0.04%。评价了温度、矿化度、p H值三个因素对凝胶体系成胶性能的影响,结果表明:随着温度的升高,成胶时间变短,凝胶粘度先变大后变小;对p H值适用范围广,p H值在8~10时,成胶时间较短,凝胶粘度较大;随着钙离子浓度的增加,成胶时间变短,凝胶粘度基本不变;室内封堵实验表明,该凝胶体系封堵率达98%以上,具有一定的堵水作用。该研究对东河油田进一步提高水驱采收率提供了理论基础和技术支持,具有重要的指导意义。Based on the reservoir characteristics in Donghe oilfield including high pressure, high temperature and high salinity of formation water,polymer SD7000 was selected to research and optimize profile control agents. The formulation of the agents was polymer 0.6%+high temperature cross-linking agent 0.3%+stabilizer 0.08%+ improver 0.04%. The impact of temperature, salinity and p H value on gelling performance of profile control agents was evaluated. The results showed that the gelation time was shortened, gel viscosity first became larger and then smaller with the increase of temperature; applicable p H value scope of the agents was wide, the gelation time was shorter and gel viscosity was larger when the p H value was 8~10; the gelation time was shortened and gel viscosity was basically unchanged with the increase of concentration of calcium ion. The plugging experiment of the agents indicated that the plugging rate was more than 98%.
分 类 号:TE357[石油与天然气工程—油气田开发工程]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:18.219.24.193