页岩油加氢精制工艺氢耗的研究  

Study on hydrogen consumption in hydrorefining process of shale oil

作　　者：李宇[1] 乔海燕[1] 石薇薇[1] 韩冬云[1] 曹祖宾[1] LI Yu QIAO Hai -yan SHI Wei - wei HAN Dong - yun CAO Zu - bin(Chemical ＆ Environmental Department ,Liaoning University of Petroleum ＆ Petrochemical Technology, Fushun 113001, China)

机构地区：[1]辽宁石油化工大学化学化工与环境学部,辽宁抚顺113001

出　　处：《石化技术与应用》2017年第1期23-27,共5页Petrochemical Technology & Application

摘　　要：以页岩油为原料油,以Mo-Ni/Al2O3为加氢催化剂,利用固定床加氢反应装置对页岩油加氢改质的氢耗进行了研究。将加氢反应分为杂原子脱除、烯烃和芳烃饱和、环烷烃开环和加氢裂化3类反应,通过分析原料油与产物的性质组成,计算各项反应化学氢耗量。结果表明,在进料量为50 g/h、温度为380℃、压力为8.0 MPa、体积空速为1.5 h-1、氢油体积比为600∶1的条件下,杂原子脱除、烯烃和芳烃饱和、环烷烃开环和加氢裂化3类反应平均氢耗量占总化学氢耗量分别为11.38%,56.51%,32.10%。在2种不同工况条件下计算出的理论总氢耗(物理氢耗为0.140 1 g/h)分别为2.422 1,2.811 6 g/h,与实测氢耗量相比,误差分别为4.64%,4.04%。With shale oil as raw oil, with Mo - Ni/ Al2L3 as hydrogenation catalyst, hydrogen consumption of shale oil hydrogenation modification was in- vestigated in a fixed -bed hydrogenation reaction unit. The hydrogenation was divided into three reactions ： heteroatom removal, olefins and aromatics sat- uration, ring - opening of cycloalkanes and hydrocracking. The hydrogen consumption of each reaction was calculated by analyzing properties of raw oil and products. The results showed that under the condi- tions of feeding rate 50 g/h, temperature 380 ℃, pressure 8.0 MPa, hourly space velocity 1.5 h -1, hydrogen to oil volume ratio 600： 1, the average hy-drogen consumption accounted for 11.38% , 56.51% ,32.10% respectively of the total chemical hydrogen consumption in heteroatom removal, olefins and aromatics saturation, ring - opening of cycloalkanes and hydrocracking reactions. Under the two different operation conditions, the theoretical total hydrogen consumption （physical hydrogen consumption 0. 140 1 g/h） was 2. 422 1,2. 811 6 g/h respectively, and compared with the practical hydrogen consumption, the error rately. was 4.64% ,4.04% separately.

关 键 词：页岩油 加氢 氢耗 

分 类 号：TE624.431[石油与天然气工程—油气加工工程]