基于蓝牙的多路无线测温系统设计和实现  

Design and implementation of multi-channel wireless temperature measuring system based on Bluetooth

作　　者：李治根[1,2] 曹小涛[1] 杨维帆 高兆强[1,2] 郭溪溪 单海蛟 

机构地区：[1]中国科学院长春光学精密机械与物理研究所,吉林长春130033 [2]中国科学院大学,北京100049

出　　处：《现代电子技术》2017年第2期129-132,共4页Modern Electronics Technique

基　　金：国家自然科学基金(41175028)

摘　　要：为了解决高速转动物体的温度测量问题,设计了一种基于蓝牙的多路无线测温系统。该系统以热电偶为信号来源,采用AD595和两级放大电路进行信号放大,以Silicon Labs公司研发的C8051F340单片机为控制核心,通过其内部的ADC0子系统完成对温度信号模拟量的采集。使用VC++6.0开发的上位机可以通过蓝牙发送指令给C8051F340,使其执行相应的温度采集动作,并将传回的温度值显示出来。实验结果和在制动器测试机上的应用表明,该无线测温系统范围在0~1 000℃,精度能达±0.3℃,而且系统稳定性好,能很好地满足各种工业温度测量需要,特别是需要无线测温的场合。In order to solve the temperature measurement problem of high-speed rotating objects,a multi-channel wireless temperature measuring system based on Bluetooth was designed. In the system,the thermocouple is taken as the signal source,AD595 and two- stage amplification circuit are adopted to amplify the signal,and MCU C8051F340 developed by Silicon Labs Company is acted as the control core,in which the subsystem ADC0 collects the temperature signal analog quantity. The host computer developed with VC ＋＋ 6.0 can send the commands to C8051F340 through Bluetooth,makes it perform the corresponding temperature acquisition action,and display the returned temperature value. The experimental results and application on the brake tester show that the accuracy of the wireless temperature measurement system can reach up to ±0.3 ℃ in the range of 0-1 000 ℃,the system has good stability,and can satisfy the requirements of a variety of industrial temperature measurement,especially for the occasion of the wireless temperature measurement.

关 键 词：蓝牙通信 无线测温 AD595 最小二乘拟合 

分 类 号：TN915-34[电子电信—通信与信息系统] TP751[电子电信—信息与通信工程]