Fenton/MBR/臭氧组合工艺处理丁苯橡胶废水  

Application of Fenton/MBR/Ozonation Process to Treatment of Styrene Butadiene Rubber Production Wastewater

作　　者：李立春[1,2] 张国亮 许丹宇[2] 马丹丹[1,2] 赵浩宁[1,2] 

机构地区：[1]天津市联合环保工程设计有限公司,天津300191 [2]天津市环境保护科学研究院,天津300191 [3]天津市滨海新区新地置业投资有限责任公司,天津300457

出　　处：《中国给水排水》2017年第2期87-89,95,共4页China Water & Wastewater

摘　　要：丁苯橡胶生产废水具有环状有机物多且成分复杂、可生化性差、高难降解性等特点。采用催化氧化/MBR/臭氧组合工艺处理某丁苯橡胶生产企业废水,运行结果表明,该工艺运行稳定,出水水质可达到天津市《污水综合排放标准》(DB 12/356—2008)的二级标准。Styrene butadiene rubber production wastewater is characterized by many cyclic organic compounds with complex composition, poor biodegradability and so on. The combined process of catalytic oxidation, MBR and ozonation was used to treat this wastewater. The operation results showed that the combined process was operated steadily, and the effluent quality could meet the second level criteria specified in the Integrated Wastewater Discharge Standard （DB 12/356 -2008 ） for Tianjin City.

关 键 词：丁苯橡胶废水 MBR 臭氧 高效填料 

分 类 号：X783.3[环境科学与工程—环境工程]