两种钻杆耐磨带摩擦磨损性能试验对比分析  

Test Analysis and Comparison of the Friction and Wear Properties on Two Kinds of Drillpipe Hardbanding

作　　者：付太森 王建军 胡俊 赵永安[3] 徐欣 宋延鹏 FU Taisen WANG Jianjun HU Jun ZHAO Yongan XU Xin SONG Yanpeng(Zhongyuan Gas Storage Co. , Ltd. , Sinopec, Puyang 457001, China State Key Laboratory for Performance and Structural Safety of Petroleum Tubular Goods and Equipment Materials, Tubular Goods Research Institute, CNPC,Xi＇an 710077,China Baoshan Iron ＆ Steel Co. ,Ltd. ,Shanghai 201900,China Xi＇an Compwell Energy Technology Co. ,Ltd. ,Xi＇an 710065 ,China)

机构地区：[1]中石化中原储气库有限责任公司,河南濮阳457001 [2]中国石油集团石油管工程技术研究院石油管材及装备材料服役行为与结构安全国家重点试验室,西安710077 [3]宝山钢铁股份有限公司,上海201900 [4]西安康普威能源技术有限公司,西安710065

出　　处：《石油矿场机械》2016年第12期37-39,共3页Oil Field Equipment

基　　金：国家自然科学基金项目(51574278);中国石油天然气集团公司资助项目(2015E-4006)

摘　　要：钻井过程中防止套管磨损的主要措施是采用钻杆耐磨带。通过室内模拟试验评价方法,对ARM耐磨带、X型耐磨带以及钻杆接头本体材料与Q125套管组成摩擦副,在钻井液介质中进行了摩擦磨损性能评价。试验结果表明,试验评价方法可行;且ARM耐磨带具有较好的耐磨性。The drillpipe hardbanding is the primary measure to prevent casing wear in the processes of drilling wells.With the indoor simulation test evaluation method,on friction pair of the ARM hardbanding,X hardbanding,drill pipe body and casing Q125,the friction and wear properties in drilling fluid medium are evaluated in this paper.Results confirmed the feasibility of the test method,and ARM hardbanding has good wear resistance.

关 键 词：钻杆 耐磨带 套管 磨损 试验 

分 类 号：TE921.2[石油与天然气工程—石油机械设备]