纺织染整废水处理工程设计与调试  

Design and debugging of textile dyeing and finishing wastewater treatment project

作　　者：代学民[1] 邓大鹏[1] 南国英[1] 王淑娜[1] DAI Xue-min DENG Da-peng NAN Guo-ying WANG Shu-na(HeBei University of Architecture, Zhangjiakou 075024, Chin)

机构地区：[1]河北建筑工程学院,河北张家口075024

出　　处：《染整技术》2017年第1期69-72,75,共5页Textile Dyeing and Finishing Journal

摘　　要：根据对江苏某纺织染整有限公司排放的纺织染整废水的水质污染情况分析,确定采用水解酸化-好氧接触氧化-生物滤池处理工艺。经过3个多月的调试运行,在进水COD_(Cr)为713~912 mg/L,BOD_5为261~352mg/L,SS为109~183 mg/L,色度为200~350倍,NH_3-N为20~25 mg/L条件下,出水完全达到GB 4287-2012《纺织染整工业水污染物排放标准》中的排放要求。According to the analysis of the water pollution situation of textile dyeing and finishing wastewater discharged from a textile dyeing and finishing Co., Ltd., in Jiangsu, the treatment process of hydrolytic acidification aerobic contact oxidation biological filter was choose. After debugging and running for more than three months, the effluent completely reached the requirements of the textile dyeing and finishing industry water pollutants discharge standard（GB 4287-2012） when it was treated in the following conditions： influent COD_（Cr） 713~912 mg/L, BOD_5 261~352 mg/L, SS 109~183 mg/L, chroma 200~350 times, NH_3-N 20~25 mg/L.

关 键 词：纺织染整废水 工程设计 运行调试 

分 类 号：X791[环境科学与工程—环境工程]