双向拉伸聚丙烯薄膜粘接用乳液型压敏胶的制备  

Preparation of emulsion PSA for bonding biaxially oriented polypropylene film

作　　者：刘红[1] 乔永洛[1] 申亮[1] Liu Hong Qiao Yongluo Shen Liang(Department of Polymer and Coating, Institute of Chemistry and Chemical Engineering, Jiangxi Science ＆ Technology Normal University,Nanchang 330013,China)

机构地区：[1]江西科技师范大学化学化工学院涂料与高分子系,江西南昌330013

出　　处：《中国胶粘剂》2017年第1期37-42,共6页China Adhesives

基　　金：国家自然科学基金项目(51263011)

摘　　要：以甲基丙烯酸甲酯(MMA)为硬单体,丙烯酸丁酯(BA)和丙烯酸乙基己酯(EHA)为软单体,丙烯酸羟乙酯(HEA)、丙烯酸羟丙酯(HPA)及丙烯酸(AA)为功能单体,乙烯基三乙氧基硅烷(A-151)为交联单体,过硫酸铵(APS)为引发剂,采用种子乳液聚合法合成了BOPP(双向拉伸聚丙烯)薄膜用丙烯酸酯乳液型PSA(压敏胶)。研究结果表明:当Tg(玻璃化转变温度)为-30℃、w(APS)=0.6%、w(复合乳化剂)=2.0%、w(AA)=3%、w(HPA)=3%、w(HEA)=3.0%和w(A-151)=0.5%(均相对于单体总质量而言)时,乳液型PSA的综合性能相对最好,其平均粒径为98 nm、稳定性良好和胶膜吸水率相对较低,并且该乳液型PSA用于BOPP薄膜粘接时具有优异的粘接性能。With methyl methacrylate（MMA）as hard monomer,butyl acrylate（BA）and ethylhexyl acrylate（EHA）as soft monomers,hydroxyethyl acrylate（HEA）,hydroxypropyl acrylate（HPA）and acrylic acid（AA）as functionalmonomers,vinyl triethoxy silane（A-151）as crosslinking monomer and ammonium persulfate（APS）as initiator,theacrylate emulsion PSA（pressure sensitive adhesive）for bonding BOPP（biaxially oriented polypropylene） film wassynthesized by seed emulsion polymerization. The research results showed that the emulsion PSA had the relativelybest combination property because its average particle size was 98 nm,its stability was good,and water absorptionof film was relatively lower,and the emulsion PSA for bonding BOPP film had the excellent bonding propertieswhen the T（gglass transition temperature）was-30 ℃,mass fractions of APS,compound emulsifier,AA,HPA,HEAand A-151 were 0.6%,2.0%,3%,3%,3.0% and 0.5% respectively in total monomers.

关 键 词：胶粘剂 丙烯酸酯 乳液 粘接性能 

分 类 号：TQ433.436[化学工程] TQ436.3