选择性激光快速熔化TC4合金成形工艺及性能  

Research on forming process and performance of TC4 alloy by selective laser melting

作　　者：李学伟[1] 孙福久 刘锦辉[2] 周长海[1] 田宏[1] Li Xuewei Sun Fujiu Liu Jinhu Zhou Changhai Tian Hong(School of Materials Science ＆ Engineering, Heilongjiang University of Science ＆ Technology, Harbin 150022, China School of Mechanical Engineering, Heilongjiang University of Science ＆ Technology, Harbin 150022, China)

机构地区：[1]黑龙江科技大学材料科学与工程学院,哈尔滨150022 [2]黑龙江科技大学机械工程学院,哈尔滨150022

出　　处：《黑龙江科技大学学报》2016年第5期536-540,共5页Journal of Heilongjiang University of Science And Technology

基　　金：国家重点研发计划项目(2016YFC0802705-02/03);黑龙江省应用技术研究与开发计划项目(GC15F008);哈尔滨市应用技术研究与开发项目(2016RAXXJ023)

摘　　要：为探讨选择性激光熔化成形工艺参数对TC4合金激光熔化成形的影响,采用自制金属粉末成形机,在不同激光工艺参数下制样,测量硬度与致密度,分析试样的成形质量,利用扫描电子显微镜分析组织与物相变化。结果表明:TC4合金SLM成形质量与激光能量密度不呈线性关系;随着激光能量的增加,成形质量、材料显微硬度、致密度先增加后下降;粉末经激光熔化成形后,出现粗大的β相。This paper is directed at exploring the effect of parameters behind selective laser melting process on the laser melting of TC4 alloy. The exploration consists of using the self-made metal powder forming machine which produces samples under different laser process parameters; analyzing the forming quality by measuring hardness and density; and analyzing the tissue and phase changes by scanning electron microscopy. The results demonstrate that there is no linear relation between the forming quality of TC4 alloy SLM and the laser energy density; along with an increase in laser energy come an initial increase and subsequent decrease in the forming quality,and the microhardness and hardness of the material; the selective laser melting of the powder is followed by the occurrence of the coarse β phase.

关 键 词：TC4合金 选择性激光熔化 能量密度 成形质量 

分 类 号：TN249[电子电信—物理电子学] TG166[金属学及工艺—热处理]