检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
机构地区:[1]中南大学资源与安全工程学院,湖南长沙410083 [2]湘潭大学土木工程与力学学院,湖南湘潭411105 [3]湘潭大学岩土力学与工程安全湖南省重点实验室,湖南湘潭411105
出 处:《岩石力学与工程学报》2017年第2期429-436,共8页Chinese Journal of Rock Mechanics and Engineering
基 金:国家自然科学基金资助项目(51641905);湘潭大学岩土力学与工程安全湖南省重点实验室开放基金项目(16GES07)~~
摘 要:煤与瓦斯突出过程是地下煤矿开采中的一个很复杂的动力灾害问题。在综合收集整理国内外煤与瓦斯突出模拟研究基础上,以颗粒法为基础,建立数值模型和模拟过程,对煤与瓦斯突出过程中相关的微裂纹和位移演化、应力和速度场演化、瓦斯压力和颗粒分层刚度比等细观机制进行模拟和研究。研究结果表明:采用颗粒法模拟所得出的煤与瓦斯突出过程是一个相对很快的动力过程,发生的时间极短,煤岩体损伤主要以拉裂纹为主,剪切裂纹主要集中在瓦斯突出前端,而拉裂纹则深入到煤岩体中的更深部位;同时研究认为瓦斯压力对煤岩体损伤有很大影响,当瓦斯压力相对较小时,剪切裂纹主要在分布侵入体前端,而拉裂纹则沿着侵入煤岩体贯入一定的深度。当瓦斯压力相对较大时,剪切裂纹与拉裂纹贯入深度基本一致,且在煤岩体的损伤中,剪切裂纹比例随之增大;最后对模型中的分层刚度比与裂纹分布形态和应力分布进行了研究,当分层刚度比不相同时,其裂纹传播速度和形态都不相同。这些研究对于认识瓦斯突出机制和瓦斯突出防治提供了理论基础。Coal and gas outburst is a very complex dynamic disaster in underground coal mining process. In this paper,a numerical model was established based on the theory of particle flow to simulate the development of micro-cracks,displacement,force and velocity fields,and to investigate the microscopic mechanism of gas pressure and layer-stiffness ratio. The simulation results show that the coal and gas outburst is a relatively quick process. The shear cracks were mainly concentrated in the front tip of outburst,the tensile cracks occurred deep inside the coal. The gas outburst has great influence on the coal and rock damage. When the gas pressure is relatively small,the shear cracks occur at the front and the tensile crack reached deeper. When the gas pressure is relatively large,the shear cracks and tensile cracks penetrate into the same depth. The damage of coal and rock and the shear crack ratio increases. When the layer-stiffness ratios is not the same,the speed and shape of crack propagation are not the same.
关 键 词:采矿工程 煤与瓦斯突出 颗粒法 煤岩体 剪切裂纹 拉裂纹 分层刚度比
分 类 号:TD713[矿业工程—矿井通风与安全]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.15