基于AMESim的液压绞车起升性能仿真分析  

Simulation of Lifting Performance of Hydraulic Winch Based on AMESim

作　　者：胡明华[1] 马来好 杨杰[2] 陈海泉[2] 

机构地区：[1]江苏海事职业技术学院,江苏南京211170 [2]大连海事大学轮机工程学院,辽宁大连116026

出　　处：《船海工程》2017年第1期87-89,92,共4页Ship & Ocean Engineering

基　　金：江苏省高校自然科学研究面上资助经费项目(16KJB580013)

摘　　要：针对具体的技术要求,对液压绞车系统进行设计,采用AMESim软件对系统进行建模,分析系统转动惯量、钢丝绳长度,以及刚度等参数对绞车性能的影响,结果表明,钢丝绳长度和刚度对绞车转速影响较小,系统转动惯量和钢丝绳刚度对吊重起升速度影响较大,钢丝绳长度影响次之。The hydraulic winch system was designed for 5 ton crane with the lifting speed of 0. 8 m/s. The model of the system was established in AMESim to analyze the influence of the parameters upon the performance of the winch,such as the inertia of the system,the length of the wire rope and the rigidity of the wire rope. The results showed that the length and rigidity of the wire rope had little effect on the rotation speed of the winch,the inertia of the system and the rigidity of the wire rope had a greater influence on the lifting speed of the crane than the length of the wire rope.

关 键 词：液压绞车 AMESIM 系统设计 起升性能 

分 类 号：U664.4[交通运输工程—船舶及航道工程]