氧化石墨烯/呋喃树脂复合材料的制备及其性能  

Preparation and properties of graphene oxide/furan resin composites

作　　者：李琛[1,2] 晏石林[3] 杨亚运[1,2] 李胜方[2] 余波 

机构地区：[1]武汉理工大学材料科学与工程学院,武汉430070 [2]湖北理工学院化学与化工学院,黄石435003 [3]武汉理工大学理学院,武汉430070 [4]黄石汇波材料科技股份有限公司,黄石435004

出　　处：《复合材料学报》2017年第2期278-283,共6页Acta Materiae Compositae Sinica

基　　金：国家科技支撑计划课题(2015BAB07B04);教育部留学回国人员科研启动基金(教外司留[2014]1685)

摘　　要：用改良的Hummers法制备出氧化石墨烯(GO),再通过溶液共混,逐步升温固化制备得到GO/呋喃树脂复合材料。利用FTIR、XRD和SEM对GO/呋喃树脂复合材料的微观结构和形貌进行表征,同时对其黏度、玻璃化转变温度、热分解温度、残炭率及硬度进行了检测。结果表明,GO较均匀地分散于呋喃树脂基体中,且两者界面相容性较好。GO/呋喃树脂复合材料的热性能和力学性能相对于纯树脂都有一定的提高。与纯呋喃树脂相比,当GO的添加量为0.3wt%时,GO/呋喃树脂复合材料的玻璃化转变温度提高了36℃,热失重5%时的温度提高了16℃;当GO的添加量为0.1wt%时,GO/呋喃树脂复合材料的残炭率从50.7%提高到53.9%,邵氏硬度从90提高到97。Graphene oxide（GO）was prepared by a modified Hummers method,and then GO/furan resin composites were prepared through the solution blending and curing by increasing temperature step by step.The structure and morphology of the composites were characterized by FTIR,XRD and SEM.Meanwhile,the viscosity,glass transition temperature,thermal decomposition temperature,char yield and hardness were tested in detail.The results show that GO has good dispersibility in furan resin matrix and the interface between GO and furan resin of composites is quite compatible.Mechanical and thermal properties of GO/furan resin composites can be improved obviously.The glass transition temperature of the GO/furan resin composites with 0.3wt% of GO added increase by36 ℃,and 5% mass loss temperature increased by 16 ℃ respectively compared with that of the pure furan resin.The char yield of GO/furan resin composites with 0.1wt% of GO added increase from 50.7% to 53.9% and the shore hardness increase from 90 to 97.

关 键 词：氧化石墨烯 呋喃树脂 溶液共混 复合材料 热性能 力学性能 

分 类 号：TB332[一般工业技术—材料科学与工程]