铺层取向误差对CFRP可折叠管件半片变形影响的数值分析与试验研究  

Experiment and numerical simulation on deformation of CFRP collapsible tube semi-sheet resulted from the deviation of ply orientation angle

作　　者：文琼华[1] 文友谊[1] 李博[1] 李帆[1] 刘至真 叶宏军 

机构地区：[1]中航工业成都飞机工业(集团)有限责任公司,成都610092 [2]中航工业复合材料有限公司,北京100130

出　　处：《复合材料学报》2017年第2期374-380,共7页Acta Materiae Compositae Sinica

摘　　要：以单层厚度为0.04mm的碳纤维/树脂(T300/5228,CFRP)超薄单向预浸料,采用真空袋-固化炉成型方法制备了一系列不同铺层复合材料"Ω"型可折叠管件半片,并采用ANSYS软件进行了有限元分析,通过实验和数值模拟方法研究了铺层方式及取向误差对变形的影响,制备的四种铺层方式制件实验测量其变形趋势与相应模拟分析结果一致,得到了铺层取向误差对变形影响较小的铺层方式。研究发现:±45°铺层比0°铺层的铺层取向误差对变形影响更大,增加90°铺层可以在一定程度上控制因铺层取向误差导致的可折叠管件半片的变形。研究结果表明通过铺层设计可以在一定程度上实现对CFRP可折叠管件半片变形的控制。The collapsible tube semi-sheet with the different plies composite ＂Ω＂ figuration part was manufactured by the method of vacuum-oven cured using carbon fibre reinforced plastics（CFRP,T300/5228）composite as ultrathin unidirectional prepreg with 0.04 mm ply thickness,and was analyzed by ANSYS software of finite element analysis.The effects of ply mode and the deviation of orientation angle on deformation were studied.Four ply mode parts were manufactured,and the deformation measurements are consistent with the numerical simulation analysis results.The ply mode of less effect on the deformation was obtained.The research show that±45°plies affecte on deformation more than that of 0°ply,and 90°plies addition can control ply orientation deformation,which can partly control collapsible tube semi-sheet deformation.The CFRP composite collapsible tube semi-sheet deformation can be controlled to a certain extent by stacking sequence design.

关 键 词：可折叠管件 变形 碳纤维/树脂 复合材料 铺层取向误差 数值模拟 

分 类 号：TB332[一般工业技术—材料科学与工程]