基于FBG传感器的变压器振动信号检测与分析  

Transformer vibration signal detection and analysis based on FBG sensor

作　　者：高立慧[1] 赵振刚[1] 张长胜[1] 郭丽君[1] 李凯[1] 李川[1] CHEN Wu-fen 

机构地区：[1]昆明理工大学信息工程与自动化学院,云南昆明650500

出　　处：《传感器与微系统》2017年第2期64-66,70,共4页Transducer and Microsystem Technologies

基　　金：国家自然科学基金资助项目(51567013);昆明理工大学人才培养基金资助项目(KKSY201303004);云南省应用基础研究计划资助项目(2013FZ021)

摘　　要：为了早期发现电力变压器的振动故障问题,需要选择有效位置对变压器的振动状态进行检测。针对电力变压器铁芯—绕组振动特性,通过有限元分析,仿真得到铁芯—绕组测点位置。以型号为S13—12500/35型油浸式无励磁调压35 k V电力变压器为试验对象,将光纤Bragg光栅(FBG)振动传感器安装于铁芯—绕组的测点位置,对不同负载下变压器振动信号进行检测与频谱分析,结果表明:变压器振动信号频率集中在100 Hz及其倍频处;在80%,90%,100%负载下,幅频信号100 Hz处的振动幅值随着变压器负载的增大而增大。In order to early detect the vibration fauh of power transformer, it needs to select effective position to detect vibration state of transformer. Aiming at characteristics of power transformer core winding vibration and through finite element analysis, position of measuring points is determined. In model S13-12500/35 oil-immersed transformers subjects, FBG sensor is installed on the vibration measuring point location of core and winding, transformer vibration signal is detected and frequency spectrum is analyzed under different load. The results show that the vibration signal frequency of transformer is focused on the 100 Hz and the frequency doubling; under 80 % ,90 %, 100 % load,vibration amplitude of the amplitude-frequency signal at 100 Hz increases as the load of transformer increases.

关 键 词：光纤BRAGG光栅 变压器振动信号 铁芯—绕组 有限元分析 

分 类 号：TP212.9[自动化与计算机技术—检测技术与自动化装置]