二氧化钒/泡沫镍一体化电极材料的制备及其电化学特性研究  

Preparation and Electrochemical Characteristics of VO_2/Nickel Foam Integrating Electrode Materials

作　　者：李坤振 袁江涛[1] 刘中飞[1] 熊狂炜[1] 金绍维[1,2] 王佩红[1] 

机构地区：[1]安徽大学物理与材料科学学院,合肥230601 [2]安徽省信息材料与器件重点实验室,合肥230601

出　　处：《人工晶体学报》2017年第2期291-296,共6页Journal of Synthetic Crystals

基　　金：国家自然科学基金(61671017)

摘　　要：采用五氧化二钒,草酸和泡沫镍作为原料,经一步水热反应法,成功制备出二氧化钒/泡沫镍一体化电极。X-射线衍射仪(XRD)和扫描电子显微镜(SEM)用来表征二氧化钒/泡沫镍电极材料的物相和形貌。结果显示,当草酸浓度为0.1 mol·L^(-1)时,制备的二氧化钒具有纳米片状结构,其厚度为80~140 nm。电化学结果显示,二氧化钒/泡沫镍一体化电极材料,其比电容高达3.99 F·cm^(-2)(在电流密度为1 m A·cm^(-2)),这是由于生长在泡沫镍上片状二氧化钒具有高的比表面积。经过2000次的循环后,二氧化钒/泡沫镍电极的比电容仅损失9.95%,显示很好的循环稳定性。The VO_2/nickel foam integrating electrode materials were successfully prepared by one-pot hydrothermal approach,using V2O_5,oxalic acid and nickel foam as raw materials. The structures and morphologies of VO_2/nickel foam electrodes were characterized by（XRD） spectrometry and scanning electron microscopy（SEM）. The results indicate that the VO_2 shows a nanoflake-structure when the concentration of oxalic acid is 0. 1 mol·L^-1,this nanoflake-structured of VO_2 has a thickness ranges of80-140 nm. The electrochemical results indicate that the VO_2/nickel foam electrode with a nanoflakestructured shows a specific capacitance of 3. 99 F · cm^-2at a current density of 1 m A · cm^-2. It is ascribed to a high specific surface area of the nanoflake-structured VO_2/nickel foam electrode. The nanoflake-structured VO_2/nickel foam electrode is recycled for 2000 cycles,only 9. 95% of its specific capacity is lost,exhibits good cycle stability.

关 键 词：二氧化钒/泡沫镍 电极材料 比电容 

分 类 号：O614[理学—无机化学]