检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
机构地区:[1]西安科技大学地质与环境学院,陕西西安710054 [2]中煤科工集团西安研究院有限公司,陕西西安710077
出 处:《工矿自动化》2017年第3期30-34,共5页Journal Of Mine Automation
基 金:陕西省工业科技攻关项目(2016GY-161);中煤科工集团西安研究院有限公司重点基金项目(2015XAYZD16)
摘 要:为解决下煤层采动时工作面顶板压力大、支架压死等问题,以韩家湾煤矿为工程背景,从多煤柱相互影响的角度出发,采用UDEC模拟软件对残留煤柱爆破前后的应力演化规律、顶板活动规律进行了研究。研究结果表明,下煤层采前对上层煤柱进行爆破,能够有效消除巷道围岩应力集中的问题;长壁工作面位于煤柱的正下方时,顶板垂直应力达到最大,易出现因载荷集中造成支架压死的现象。该研究成果对类似条件矿井安全开采的顶板控制具有一定的指导意义。In order to solve problems of big roof pressure and hydraulic support crushed down on working face during lower coal seam mining,taking Hanjiawan Coal Mine as engineering background,stress evolution law and roof movement law before and after blasting of residual coal pillar were studied by UDEC simulation software from the viewpoint of interaction of coal pillars.The study results show that the upper pillar blasting before the lower coal seam mining can effectively eliminate the stress concentration of the surrounding rock;vertical stress of roof reaches the maximum and is easy to appear support crushed caused by load concentration when long wall working face locates directly below coal pillars.The study result has a certain guiding significance for roof control of mine safety mining in similar condition.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.33